Airbags are a great invention. They protect us in the event of a crash. When a front end collision or even a side collision occurs the airbags are there to protect us from harm. In addition to the seatbelt, the airbag prevents us from colliding with the metal frame of the car or even be ejected out of the car causing a traumatic injury. Even if the car has been in a low impact collision the airbag module does store the crash data. In order for the airbags to work correctly, and srs airbag module reset needs to be done. This is true even if the airbag did not deploy. That is why many times at car crash scenes if the airbag has not deployed, the firefighters before they attempt to get the victims out of the car will either deploy the airbag or disconnect them. When a vehicle is in a crash and the airbags did not deploy, they are at risk of deploying at any time. If you do not do an srs airbag module reset the airbag may not deploy or work correctly should you need them.
When this occurs you do not need to get a new airbag for your vehicle. You can still use the airbags that you have. However, it is important that an srs airbag module reset needs to be done for the airbags in your vehicle. You do not need to spend a lot of time trying to find a garage that works on airbags. This could take time and a lot of money as you would need to rent a vehicle while your car is being worked on. There is a website safetyrestore.com that can fix the airbags for you. They have had a lot of experience working on airbags and know exactly what to do to restore the airbags in your vehicle to factory standards.
All you have to do is send your airbags in and safetyrestore.com can work on them for you. They will airbag module which controls all the airbags in the vehicle. They will remove all the crash data in the module and reset the codes for you. The module will be reset to factory standards and not require any additional programming. All you have to do is plug the module back in and you are all set.
This is also true if you have an airbag light that comes on while you driving your vehicle. If this light does come on unplug the module, send it to safetyrestore.com and they will reset all the codes. When they sent it back you should not have a light come on for the airbag anymore.
Safetyrestore.com makes this process very convenient as all you have to do is send in the part that you need to be worked on. You don’t have to take your vehicle anywhere and wait for days to get it back. They have a quick turnaround and you will be back on the road in no time.
Accidents happen; that’s a fact, and if you’re involved in one, and your airbags deploy, you may ask yourself, “What do I do now?” Well, replacing airbags can get costly, and you could find yourself paying upwards of $1,000 to $1,500 for one airbag. With the other issues caused by the accident, the last thing you want is to have to replace them. Changing airbags is not only costly but also time-consuming, and learning about airbag reset services can make a big difference in your finances.
Searching “airbag reset service near me” is a step in the right direction. SRS Airbag Module Reset Service is a service that resets your airbag module and saves money and time. You send your airbag control module in, and they will reset it and send it back within 24 hours. Resetting to factory conditions is their guarantee, and starting at just $49 is even more incentive to call.
Looking for the airbag module location can be frustrating as well if you are not a mechanic because depending on the make and model of the vehicle, these locations vary. Plenty of people try to save money by fixing things on their own, and while you can google just about anything you want to know, ask yourself if you are sure you can make it work. Do you remember putting together a child’s toy on Christmas Eve? Knowing how frustrating that turns out most of the time, why try to do a crash data reset? Leaving it to the experts is your best bet.
Additionally, becoming overwhelmed with information can also turn a small project into major surgery. Do yourself a favor and google “airbag reset near me,” you can rest assured that the srs airbag module reset is done right.
Here’s a small exercise: Google “how to reset airbag light,” unless you are in a position to watch a video while you perform the procedure, or have someone reading the instructions, you probably won’t reset the airbag light, and all the DIY videos in the world won’t change that.
After any auto accident, it is important to observe any repairs that you may need to do on both the external parts of the vehicle, as well as the internal components, such as the Supplemental Restraint System. Aside from obvious things like getting an airbag module reset, the seat belt webbing may need to be repaired or replaced. While the actual seat belt may be responsible for locking and tightening the slack, it is only as strong as your webbing material. With enough force from an impact, the webbing can stretch during an accident.
Whether your seat belt is stretched, ripped, frayed or even chewed by a dog, you will need to get them replaced. When replacing your seat belt webbing, you can choose to go with the same exact look as your vehicles originally has. However, while you are getting new webbing, you may as well get a new color for them as well. Safety Restore offers custom color seat belt webbing replacement, offering dozens of color options.
Trusted by thousands of customers, Safety Restore offers exceptional vehicle services such as seat belt pretensioner repair and SRS Airbag Module Reset . Among these, they can even help with your dog chewed seat belt webbing. With their services, there is no need to buy a new seat belt. They can use your current seat belt and simply re-web it to its factory condition. They do a color match on black, grey, and tan seat belts; however, as mentioned earlier, they can also give your webbing a whole new vibrant color. The certified technicians at Safety Restore use 100% OEM parts, that meets or exceeds the FMVSS standards. The professional automated sewing machine guarantees clean beautiful stitching. One thing to mention, this is not a seat belt webbing repair kit. Simply ship your old worn out seat belts or seat belts that are in need of some color to Safety Restore and they will handle your seat belt webbing replacement within 24 hours! They do the work for you, so you do not need to buy a seat belt webbing repair kit to do it yourself. Whether you are getting SRS Airbag Module Reset, replacing your seat belt webbing, or simply getting your cluster repaired, let Safety Restore help you get back on the road quickly and safely.
After any auto accident, it is important to observe any repairs that you may need to do on both the external parts of the vehicle (such as bumper), as well as the internal components (such as the Supplemental Restraint System). Aside from obvious things like getting an airbag module reset, the seat belt webbing may need to be repaired or replaced. While the actual seat belt may be responsible for locking and tightening the slack, it is only as strong as your webbing material. With enough force from an impact, the webbing can stretch during an accident.
Stretching of the webbing from an accident, may not be the only reason you would need to get the webbing repaired/ replaced. We all know dogs love to chew. Seat belts can get worn, frayed, or even chewed by your dog. Whatever the reason, make sure you are fully protected in your vehicle in the case of an accident. If you are in need of seat belt webbing replacement, there are several options to choose from for the color or style of the webbing. When replacing your seat belt webbing, you can choose to go with the same exact look as your vehicles originally has. However, you have the option to give your vehicle a different vibe with a different color. Safety Restore offers custom color seat belt webbing replacement, offering dozens of color options.
Trusted by thousands of customers, Safety Restore offers exceptional vehicle services such as seat belt pretensioner repair and SRS Airbag Module Reset . Among these, they can even help with your dog chewed seat belt webbing. With their services, there is no need to buy a new seat belt. They can use your current seat belt and simply re-web it to its factory condition. They do a color match on black, grey, and tan seat belts; however, like mentioned earlier, they can also give your webbing a whole new vibrant color. The certified technicians at Safety Restore use 100% OEM parts, that meets or exceeds the FMVSS standards. The professional automated sewing machine guarantees clean beautiful stitching. One thing to mention, this is not a seat belt webbing repair kit. Simply ship your old worn out seat belts or seat belts that are in need of some color to Safety Restore and they will handle your seat belt webbing replacement within 24 hours! They do the work for you, so you do not need to buy a seat belt webbing repair kit to do it yourself. Whether you are getting SRS Airbag Module Reset, replacing your seat belts from an accident, dog chewed, color change, or anything else, leave it to the professionals at Safety Restore to help you get your seat belt webbing looking new and back to keeping you safe.
You may already know that your vehicle has an SRS airbag control module stored in it and that the entire airbag system runs through this unit. You may also be aware that your airbags will not deploy, or work in general, if there are any faults in the module. However, you may not know—or know to the full extent—why the airbag module is so important, especially when it comes to piecing the information together after a car accident. After reading everything below, perhaps you will get a better picture of what the module does and why it is so important!
Basically, when an accident occurs, the SRS airbag control module stores information from the event in the form of crash data and hard codes. Everything from the vehicle speed, throttle position, engine speed, and brake light switch position is recorded. The unit may also pick up seat belt pre-tensioner deployments, airbag deployments, seat belt use, and impact speed change. As you can imagine, that can go a long way in painting the picture of an accident scene.
For law enforcement, the SRS airbag control module is a complement to the on-ground investigation. With permission or a search warrant, police and investigators can extract the information from the car’s on-board diagnostic port. On a side note, the diagnostic port is what mechanics use to check what is wrong with a car, whether or not a car still has power, and the like. Once the investigators lay hands on this information, they can then proceed in printing out a report on it. When the data is good, it can help test the truth of eyewitness statements obtained at the scene of the accident.
You may have heard friends or family members talking about needing to get an SRS airbag reset but have never understood what they meant, or what an SRS airbag even was! Because the SRS airbag control module is such an important unit in your vehicle, it would behoove you to learn a little bit more about the role it plays in the overall function of your vehicle. Hopefully you will learn some of that below.
To start off, it is vital that you know where the unit is located in your car. That way, if you have to have it replaced, you’ll know where to look! In most cars, the module can be located underneath the passenger or driver’s side seat. Sometimes, though, it can be found in the kick panel, below the radio, behind the steering wheel, or in the center console.
You’ll know that an SRS airbag reset is necessary if your car has recently been involved in a crash. That is because when a car is involved in a crash, the module automatically stores information from the crash in the form of hard codes and crash data. When this data is present, the airbags will stop working. That is why getting an SRS airbag reset immediately after a crash is so important. You don’t want to face a situation where you need the airbags to protect you and not have them work!
Another obvious reason to get an SRS airbag reset is if the airbag light suddenly turns on in your dash. If this light turned on in your car, that means the computer sensed a fault inside of the airbag system and is trying to tell you to fix it right away. Again, you don’t want to put off getting this repair, as it may be detrimental to both your safety, as well as the safety of the passengers in your vehicle!
Think about the number of car accidents you see during a typical week, and then try imagining that amount occurring in every neighborhood, every city, and every state in the country. The amount of car accidents that occur daily is mind-boggling and the number is just steadily increasing with each passing day. That is because there are more drivers out on the road today then there were even a decade ago!
Unfortunately, when a car is involved in a crash, there is a lot of damage that needs to be repaired—and often times these repairs cost a lot of money. Some of them can be left the way they are and will simply make the vehicle look less than favorable. Others actually infringe on the function and safety of the vehicle and shouldn’t be ignored. “Clear crash data airbag module” is one of the top searches for vehicle owners who have been involved in a crash. If you are searching, “Clear crash data airbag module” online, then you likely are dealing with a serious problem. The SRS airbag control module is the unit in all vehicles that registers when an accident occurs and stores information in the form of hard codes and crash data. This crash data can be accessed through an OBD airbag scanner. However, nothing but an airbag reset will get rid of this data. It is important to note that if the hard codes are not cleared, the airbags in the vehicle will not function—which can be very dangerous. As you probably already know, the airbags are the second most important safety feature in vehicles, right after seat belts. You definitely don’t want to risk them not working!
We are constantly looking at fifty things at once when driving on the road. Making sure we are driving the speed limit, keeping an eye out on the cars around us, seeing if our gas is not on empty, what the radio station is on, and so much more. As a result, we may miss any random light that may pop up. This includes the airbag light or the SRS warning light. However, if the light is on, do not ignore it as it may be an indicator of something wrong with your vehicles Supplemental Restraint System. If you are ever in an accident, the airbags may not work properly. For example, the airbags may not be able to deploy correctly during a collision. Though the seat belts are the first line of defense, the airbags play a major role in protecting you even more when seat belts are just not enough.
The airbag module is the brains of your airbag system. It is always working and writing data. It also communicates with the vehicles engine computer. The airbag module determines what needs to occur, such as airbags deploying or the seat belt pretensioner locking, in the event of an accident. If the airbag module is not working correctly, it is not safe to drive your vehicle, as you may not be protected while on the road. It is a good idea to check the car system for fault codes as the SRS warning light may be an indicator to an issue with the airbag module.
If there seems to be an issue with the airbag system, it is important to get it fixed as soon as possible. Going to a dealer may cost you upwards of $1,000. They may recommend you get a new airbag module but that is not always needed. A reset or repair may be all that the module requires. Safety Restore is a post accident restoration company that specializes in the vehicles Supplemental Restraint System. Once they receive your module, they will repair/reset your module and ship it back within 24 hours and for a fraction of the cost at a dealer. Visit SafetyRestore.com to get back on the road quickly and safely.
If you have educated yourself on the different safety components in your vehicle, you likely learned about the SRS airbag module. If you have not, I cannot stress enough to you the importance of it for the overall functionality and safety of your vehicle. Even though it is a small component in your vehicle, it plays a big role. Let me tell you just how it does that.
To start off, the SRS airbag module is a computerized system in your car. What it basically does is control the entire airbag system in your vehicle. Everything from the airbags themselves, the impact sensors, and even the seat belt pre-tensioners—relies on the module to properly function. During a sudden stop or collision, where the airbags deploy, the airbag module stores a ton of information in the form of crash data and hard codes. This information includes seat belt use, the vehicle and engine speed, seat belt pre-tensioner deployments, impact speed change, throttle position, airbag deployments, and brake light switch position. Interestingly enough, this type of information is almost always admissible in court and usually trumps other physical evidence or verbal explanations.
When the airbag module is not up to par—or has all this data stored—the airbags cannot deploy in an accident. This, as a result, can potentially lead to serious injury or even death. That is why you should have the unit replaced immediately. You do not want to be endangering your own life or that of your passengers.
When resetting their SRS airbag module, many people run into the issue of their airbag module not communicating properly. This can happen for a number of reasons. Read below to find out a few of those reasons.
One reason your SRS airbag module may not be communicating properly is because it is improperly grounded. This simply means that it needs to be bolted down completely in the reinstallation process. Believe it or not, this issue is pretty common.
Another reason may be because of the communication pins at the plug. To make sure this isn’t the reason you are having communication issues, make sure to inspect the communication pins where the harness connect into the front of the airbag module. Look out for any damage or corrosion present. Sometimes, the pins can push back, bend, or even break off.
A third cause of your airbag module not communicating may be because of problems with your scanner, and not the actual module itself. To scan your airbag module, make sure that the scanner you use is able to properly read the airbag diagnostic codes. The scanner should access your airbag system and support your vehicle make and model. A lot of scanners are just set to read the basic engine codes so you want to make sure yours is set to read your codes. Also, if you have a newer car you want to make sure you are not using an outdated scanning tool.
The wiring or harness can also be the reason for the issues you are having. Make sure to check that the harness or wiring surrounding the SRS airbag module isn’t cut or otherwise damaged anywhere.
If you determine that all the above issues aren’t the reason for your communication problems, you may want to send your SRS module to a professional company like Safety Restore.