The airbag light is one of those things you should definitely pay attention to. I say this because ignoring it can literally be the difference between your life and death. When the airbag light turns on, this means that the airbag system is not properly functioning. Therefore, if you were to find yourself involved in an accident or sudden stop, your airbags would not deploy—which we all know can result in serious injury or even death.
Make sure to pay attention that your airbag light works properly. If your vehicle—and airbag system—is working properly, the light should remain off. Or, in some vehicles, it may turn on for a few seconds along with all other displays and then immediately dim out. This is normal. If the light persists, however, this is when you should get your airbag system looked at!
You can either send your vehicle in to a trusted automotive shop, or purchase a scanning tool on your own to check for any fault codes or crash data in your vehicle’s SRS airbag control module. This module is a small device that will be able to tell you all you need to know about your faulty airbag system. Once any codes are detected, you should then proceed by getting them removed. This can be accomplished by either replacing the unit entirely with a brand new module, or buying software to reset the unit from home. There are numerous online resources detailing how the unit can be reset. If you don’t completely trust in your own abilities, you also have the option to send the unit in to Safety Restore. This company will completely eradicate all hard codes and crash data and will return a practically new module back to you. You’ll also have a lifetime warranty to go with it.
If you are unsure of what causes the airbag light to come on in a vehicle, let me fill you in.
Basically, the airbag light comes on when any part of the airbag system—which consists of the seat belts, impact sensors, the SRS airbag control module, and the actual airbags—is not functioning properly. The airbag light warns the driver that the airbags will not deploy during a collision or sudden stop until the problem is dealt with. Without airbags deploying, the occupants of that vehicle can face serious injury and possibly even death, as they will not be protected in this way.
To avoid driving hazardously, drivers should immediately do everything in their power to get their airbag system working properly again. Oftentimes, the solution lies in the SRS airbag control module. Drivers have the choice to purchase a brand new SRS airbag control module at the dealer, or have their present one reset. The first option may sound better but it costs much more—and honestly, the second option can garner the same results.
If drivers choose to have their present module reset, they can either do it themselves or bring it to a company to get it done. The DIY option certainly does take some work but is still doable. All that is needed is the right software and tools, detailed instructions from online, and patience. The unit needs to be removed from the vehicle, the hard codes and crash data removed, and then the unit can be reinstalled into the car.
There are many large vehicle repairs that people know about, such as changing a tire, getting an oil change, or switching out the battery. However, when it comes to smaller things like the service airbags, not many people know what exactly to do with them. However, they serve a very important role and should definitely be on the list of things to know about your car.
So what exactly does service airbag mean? Let me fill you in.
The service airbag message is something that can appear on the DIC of your vehicle, which stands for driver information center. This message can show up if there is an issue with the airbag system that needs to be resolved. The issue can be minor, or it can be something a lot more pressing—it may be telling you that your airbags will not deploy should an accident occur! This means that you will not be protected and can face some serious injury or possibly even death. Therefore, when you see the service airbag message pop up, you should immediately get it fixed. What you might also experience with the service airbag message popping up is your SRS airbag light turning on. This may occur if your car was previously involved in an accident that resulted in the activation of the crash sensors without the airbags actually deploying. As was already mentioned, this is just another reason to get your car looked at.
You definitely have a few ways you can go about handling both the service airbag message and SRS airbag light turning on. First, you can go to the dealer to buy a brand new SRS airbag module. If you are well versed in automotive repair, you also have the option of resetting the unit yourself. Of course, if you aren’t fully sure in your abilities, or don’t want to spend the money on software and tools, you can turn to the company Safety Restore to help.
It is always important to know the different parts of your vehicle and how they work—especially ones that don’t get talked about often. The SRS light is an example of that. Many people do not know why it turns on and what should be done when it does. Let me fill you in below.
First of all, to understand why the SRS light turns on, you should know what SRS stands for. SRS is the abbreviation for supplementary restraint system. It is the name given to basically the entire airbag system. Therefore, when the SRS light turns on in a vehicle, it means that something is amiss in the airbag system. This can be an indication of a problem with the actual airbags, the impact sensors, the seat belts, or the SRS airbag control module. More often than not, the problem can be fixed by simply removing the SRS airbag control module out of the vehicle and having it replaced or reset. Before replacing it entirely or resetting it, you should first have it checked for crash data or hard codes. This can be done using a special scanning tool, or by sending it in to a trusted automotive shop. Once the specific codes and data are determined, the next step would be to remove them and reset the unit to factory condition.
Of course you do have the choice to purchase a brand new unit at the dealer. However, that can cost you hundreds, if not thousands, of dollars and leave you with the same result had you simply reset the unit. If you choose with the resetting route, you can purchase software and tools and follow instructions online to remove all the fault codes. Or, you can just send your SRS airbag module to Safety Restore. The company will reset the module completely to factory settings and once you get it re-assembled into your vehicle you shouldn’t experience the SRS light any longer.
Have you ever looked at the pesky light(s) that turned on your speedometer and actually done something about it? Or are you like most people who just ignores it in hopes of it somehow going away? Believe it or not, ignoring the light, especially if it is your airbag light can be the fine line between your life and death. Below, let me explain to you what it means when the airbag light comes on, and why you shouldn’t just ignore it.
To start with, you should probably know what the airbag light really means in order to know why it is so dangerous to disregard it. The airbag light turning on basically says that there is something wrong with your airbag system—which can include anything from the seat belts, impact sensors, airbags, or SRS airbag control module. When the airbag light pops up, it means the airbag system cannot operate properly and therefore the airbags will not deploy in the event of a collision or sudden stop. Obviously, this is a serious problem as the airbags are important safety features in a vehicle.
If you want your airbag light to turn off, your best bet would be to purchase a scanning tool that can tell you what hard codes or crash data are found in your vehicle’s SRS airbag control module. You can bring your vehicle into an automotive shop for them to do this step for you just as well. Once the fault codes have been detected you can go ahead with reversing the problem. You can do this by buying a brand new unit at the dealer or resetting your present module. The latter option is much more cost-effective and will give you pretty much the same results. You can follow instructions online to reset the airbag module at home or you can send it in to the company Safety Restore so that they could do it for you.
Many people get frustrated when they see that one of the displays on their instrument cluster lights up. Immediately, they think about the expenses that will be required to fix the problem behind the light. Often, the thought of the money alone causes them to ignore the issue at hand. However, these kinds of things should never be ignored. If you are facing such an issue yourself, you should immediately find out what is causing your light to turn on and then proceed in getting the correct repairs to have it fixed. If you are seeing this problem with your airbag light, read on to find out what it means and what you should do about it.
Basically, when your airbag light turns on, this means that something is wrong with your airbag system. This doesn’t just mean your airbags are not functioning properly though. The problem can also lie within your seat belts, your vehicle’s impact sensors, or the SRS airbag control module—which are all key elements of the airbag system. Lucky for you, the fix usually lies in removing the SRS airbag control module and getting it looked at. If you bring your unit to an automotive shop or purchase your own scanning tool, you’ll be able to decipher the hard codes and/or crash data behind the airbag light turning on. You can then proceed in purchasing a brand new control module or resetting the unit yourself. By doing so, your SRS airbag module will be working like new again and your airbag light should turn off. If the problem lies in your seat belts, then the scanning tool should be able to determine that too. Either way, the company Safety Restore can help you with both, if you do not trust yourself performing the repairs. The company specializes in resetting SRS airbag control modules and also repairing single stage, dual stage, and triple stage seat belts.
Like all the other mechanisms on an instrument cluster, the airbag light serves its own individual—and very important, may I add—purpose. Let me explain it a little more in detail below.
Normally, the airbag light turns on then quickly turns off when you start your car. This is how it should be, and indicates a properly functioning airbag system. If the airbag light stays on, however, this means that there is something wrong with your airbag system. While it is still on, the airbags will not deploy. This can obviously threaten your safety on the road, as airbags serve as secondary restraint systems.
Contrary to what you may think, the airbag system doesn’t just consist of the airbags. It also consists of the impact sensors, SRS airbag control module, and the seat belts. Therefore, you should isolate the problem to see where it is coming from. More often than not, the solution to your airbag light lies in resetting the SRS airbag control module. By removing the unit from your vehicle and taking it to a mechanic, you’ll be able to identify any crash data or hard codes that are stored in the computer. You can also buy a scanning tool and do this step from home. The next step would be to either purchase a brand new unit or reset it on your own. If you can complete the reset successfully, you’ll end up with the same result as a brand new airbag module. Plus it will save you hundreds, if not thousands, of dollars. If you are not a seasoned mechanic and don’t think you’ll be successful in resetting the unit, you also have the option of sending it in to the company Safety Restore. They are much more affordable than a dealership, and guarantee quality work.
While you are waiting to get your unit reset, avoid driving unless you find it absolutely necessary. You don’t want to be jeopardizing your life or that of your passengers.
Even though the airbag system is a relatively small portion of an overall vehicle, it plays a huge role in the overall functionality and safety of it. Many people know what airbags are but don’t know what the other different components of the system are and what they do.That is why it is important to learn about every component and what it is important for.
One of the main things that people find difficult to understand is why an airbag light stays on. This is a great thing to start with when learning about the airbag system. If you are facing this problem yourself, let me tell you what this might mean.
Typically, the airbag light turns on initially after an accident occurs. It tells you that you need to have your airbag system fixed, or else the airbags will not deploy in a future accident. As you can imagine, this can be very hazardous to your safety and should prevent you from delaying the repairs. An airbag light that stays on can also indicate an issue with your seat belt system.
One of the most frustrating things that can happen is to see one of the lights on your instrument cluster turn on, or even worse to continue blinking. If you are experiencing this problem yourself with the airbag light, let me tell you what you can do to have the dang thing stop.
First of all it is important to know why the airbag light came on in your car in the first place. There are a number of reasons. It could mean that your battery backup is drained, that you have a worn out airbag clock spring, or that your SRS airbag control module is faulty. It can also mean that something is wrong with your seat belts or impact sensors. Whatever the issue behind the airbag light, the main thing you should be worried about is the fact that your airbags will not deploy in future accidents until you get the issue fixed. That means you are subjecting yourself to possible injury or even death every time you take your car out to drive!
You should take a look at your SRS airbag module first, as this is the most common way to fix the problem. You can purchase a scanning tool that will be able to detect any codes your vehicle has and the reason behind them. This can also be done at your local body shop. The next step would be to remove the unit from your vehicle. You can then either purchase a brand new one at the dealer or reset the unit to remove the stored crash data and hard codes. Of course, this would require additional software and tools, but the job is doable. If you are scared you will mess something up, you always have the additional option to send your SRS airbag module to Safety Restore. The company also repairs safety belts if you find that the issue in your vehicle is partially due to faulty belts.
The instrument cluster is one of the things that drivers constantly look at when driving a car. It displays everything from the gas gauge to the temperature to even the functionality of the airbags. One of the most annoying things that can happen to an instrument cluster is having one of the lights turn on and stay on. The immediate reaction of most drivers is to find out what is causing the light to turn on and then proceed in fixing it. That is how it should be. Below I will explain what you should do to turn off your airbag light if you find it lighting up on your speedometer.
To begin with, when you see the airbag light turn on, you should know what the light indicates. An airbag light means that something is wrong with your supplemental restraint system, or SRS. The SRS warning may arise due to a faulty seat belt switch, a defective crash sensor, or a damaged clock spring.
There is no reason to panic, as it is quite simple to turn off the airbag light. First, you should bring your car to a local automotive shop and have the mechanics diagnose the SRS airbag module computer crash codes. They will be able to find the exact reason for the codes and what repairs you should proceed with. You also have the option of buying your own scanning tool so that you don’t have to pay a mechanic to do it for you. The actual resetting of the SRS airbag control module is something you can do on your own too. You just want to make sure to have the proper software and tools for the job. Any and all instructions you need to reset the unit can be easily found online. The great thing is that you don’t have to spend thousands of dollars to get a brand new module at the dealer by going this route. However, if you don’t trust in your own abilities to repair such a key component in your vehicle, and still don’t want to pay the steep prices at the dealer, you can send your module in to the company SafetyRestore.