SRS Airbag Module Reset After Accident

Erase Crash Data & Hard Codes Removal.
Turn off that annoying airbag light.


550+ Reviews aggregated from
Facebook, Google, BBB, Yelp,

Trusted by Thousands of Happy Customers
Don’t replace your module and spend hundreds of dollars.

Re-use your existing airbag module with our Safety Restore Airbag Module Reset reset service at a fraction of the cost. SRS Airbag module computers, found in cars, control the entire airbag system. Everything from the impact sensors, airbags and seat belts go through it. Even in the event of a minor accident, the airbag module may store crash data and light up your You are now able to re-use your existing airbag module with our reset service! Your module will be restored to its factory condition and will not require any additional programming.

Just Plug & Play! This service is 100% compatible with our seat belt repairs.

Compatible with all makes and models; 1996 and up.

Compatible with All Makes & Models

Our airbag module reset is compatible with most makes and models. If you’d like to verify compatibility feel free to give us a call at: (855) 552-7233


ADD TO CART or Contact Us
100% OEM Factory Programming

We reprogram your SRS module to factory condition, making the airbag computer as good as new. All codes from the accident will be erased and cleared. Any SRS faults that are present will come back up until the problem is addressed. An OBD scanner may easily delete some soft codes.

Our services are 100% guaranteed and require no additional programming.

Our process is as easy as 1-2-3.

How does it work?

Simply add to cart the service

Add to cart the airbag module service & complete your order.

Remove Your Module And Send It To Us

Remove your airbag module following our simple instruction and mail it to our repair center:

Safety Restore,
40 Main Street
Westfield, MA 01085

Receive your factory reset SRS module

We remove any crash data and reprogram your module to be like new.

100% Satisfaction
All repairs are complete in 24hrs or less.
Lifetime Warranty
All repairs we provide come with a lifetime warranty.
OEM Programming
We only use 100% OEM programming to make your module like new.
24hr Turnaround
All repairs are complete within 24hrs or less.


Airbag Module Reset

Why is my airbag light on?

Your airbag light may be on due to various reasons and most of the time because of an airbag fault. This could be related to the airbag module itself or any of the following airbag components:

● Airbags deployed

● Faulty seat belt pretensioners

● Faulty airbag clockspring

● Crash sensors fault

● Crash data stored

● Wiring harness problem

● Miscommunication or no communication

While these are the most common faults, your airbag light may be on due to other reasons. Regardless of what it is, you should always scan your system using an OBD airbag scanner to read and obtain the codes. If you do not own an OBD airbag scanner, you can get this diagnosed at any local shop. If you work with cars often, we recommend investing in an OBD airbag scan tool to scan the system and retrieve codes whenever your airbag light is on. The devicel is around $100 and would pay for itself almost immediately when comparing to false diagnostic fees.

How do I reset my airbag light?

The airbag light reset depends on the airbag faults. If there are minor codes such as a wiring fault or communication issue, this can usually be fixed by addressing the failure. An OBD scan tool can also erase any soft codes that are not related to a crash. If your car has been in an accident, you will probably have the airbags deployed, locked seat belts, faulty crash sensors and/or a lousy airbag clockspring. The SRS airbag system computer or module will now have crash codes or crash data known as hard codes. This is something that no airbag scan tool, not the dealer can reset. This is where we come in! Safety Restore offers affordable, and fast SRS airbag module reset service erasing all c rash data and hard codes that dealers and OBD airbag scan tools cannot! We reprogram your original SRS airbag control unit back to factory condition. No further dealer programming will be needed after our reset. Your airbag light will be rest with our service. This service is 100% guaranteed or your money back.

My airbags deployed, will I need to have my SRS airbag control module reset?

Yes. Whenever you have an airbag code related to the deployment of the airbag, you will always need your SRS module reset. Before, the only solution to this was buying a new module and laying hundreds of dollars at the dealer. Thousands of SRS units would go to trash! But with the growing industry is salvage cars being repaired, rebuilt and safely back on the road - the demand for new methods and safety procedures came to be. Our SRS airbag module reset being one of them. Many dealers, shops and individuals are now rebuilding salvage cars after the accident, that are bought from salvage auctions such as copart.com and iaai.com and rebuilt safely to be back on the road with salvage, reconstructed or restored titles. Most of these cars/vehicles will require safety salvage inspections to ensure that the motor vehicle has been safely rebuilt and is safe to operate on the road. It is also inspected against theft and stolen parts. Keeping this in mind, if your car has no airbags or had the airbags deployed, you will need the SRS unit reset.

Why does the SRS airbag control module need to be reset?

When an accident occurs, the SRS airbag module writes codes in its memory that contain crash information. Once written, this SRS controller becomes "locked" until it is replaced or reprogrammed. This is because the car will no longer be safe to operate. Besides, the airbag module goes into a "black box" state that awaits an accident investigation in case it is needed. However, when the car is written off the insurance or the accident has been minor, the vehicle can return to the road. At this point, the SRS airbag comfort modules need to be reset. We provide this reset service at an affordable price and offer a 24-hour turnaround. Your SRS module will be reset, and your airbag light will go away.

How do I remove the SRS airbag module?

The SRS airbag module is easy to remove and can be done without a professional mechanic. Though we strongly advise knowledgeable individuals removing an SRS module, it can be done at your own risk by following the easy steps: 1.Disconnect the negative terminal of your car's battery and wait at least 5 minutes before proceeding. 2. Locate the SRS airbag unit. In most vehicles, it will be under the center console which, between the front seats under the dash or the front driver or passenger seat. Most SRS units will look similar to a metal enclosure and a yellow plug. Others will have a metal enclosure with a black cap. 3.Unbolt the unit and disconnect the wire harness or airbag plugs going to it.

Airbag module replacement cost?

An airbag module replacement cost can easily exceed $1,000 when buying new from the dealer. Used airbag modules may be cheaper at a few hundred dollars. Replacing an SRS airbag module is a lengthy and challenging process due to everything that's associated with it. When you install a different module in your car, used or new, you will need to program it to your VIN which requires the dealer to do it. This adds extra costs and time. All salvage shops are now using Safety Restore to reset their SRS airbag modules instead of replacing them. Anyone working with salvage cars saves hundreds every time, and thousands throughout. We are happy to be the nationwide leader in providing affordable, and fast SRS airbag module reset service in America!

Eeprom Programming?

EEPROM re-programming consists of erasing crash data and hard codes found in the SRS airbag module by rewriting the original factory code into the memory. Your SRS unit will be reprogrammed to the original factory programming and function like new. An airbag module reset tool will not erase crash data or hard codes - our service will! Airbag module reset software may erase some soft codes, but will not reprogram the SRS module to the original condition. If you are wondering how to reset your airbag module after an accident, this is the service you need! Your airbag light that is.

Is there any additional charges?

Some modules referred to as “MCU” modules will require additional programming and chip replacement. Such will incur an additional fee of $15. You agree to potentially be required to pay this up charge.


We’re a family owned company.
Serving the entire world!

Your subscription could not be saved. Please try again.
Your subscription has been successful.


Subscribe. We never spam.