airbag Archives - Safety Restore

How to do an airbag light reset

An airbag is one of the most important components of any vehicle, an airbag is made to save you from hitting the windshield when you are in a high speed collision with another car or an obstacle on the road. That is why it is very important to make sure the airbag works properly.

If your airbag light seems to be blinking it may be caused by a couple of things; a faulty sensor, after installing a new car radio, or a malfunction in the air bag system. One of the most common reasons an airbag light may be blinking is after an accident and the airbags have deployed. You will need to have your airbag module reset. The airbag control module will store all different kinds of codes including crash codes, hard codes, soft codes, latch codes. Usually, dealerships or body shops will just tell you that you have a bad module. Bringing your module into Safety Restore and get the module fixed by professional technicians and save hundreds of dollars with amazing results.

If the airbag light won’t turn off and it wasn’t caused by an accident and was caused by a faulty sensor or just a malfunction in the system itself then there are a couple of ways to do an airbag light reset yourself. After you have fixed the problem you may do the reset by using a computerized handheld airbag light reset tool. There are a couple of steps on how to do a reset. The first step is to put the key into the ignition and turn the switch to the “on” position. The second step is to wait for the airbag light to turn on. The light will stay on for seven seconds and then shut itself off. After it shuts off, turn the switch off right away and wait three seconds. Repeat Steps 1 and 2 two more times. Start the car’s engine. The light should come on for seven seconds, and then shut off and stay off. The airbag light has been reset.

If your airbag light turns on an airbag light reset should be done right away. Driving with the light on; you may risk an accidental deployment of the airbag. Always make sure your airbag light is off and safe for you and your passengers when on the road.

Will airbag open without seat belt ?

The way that airbags work is by detecting whether or not an occupant is seated on the airbag’s corresponding seat. If there is someone seated in the seat, the manufacturer expects that a seat belt will be worn. If no one is sitting in that seat, the seat belt will clearly not be used and therefore nor will the airbag turn on for that seat. Some manufacturers do have sensors in place in the actual seat that turn the airbag on if a specified minimum weight is placed on the seat. Regardless, full inflation force will be deployed out of the airbag if it detects an unbelted average adult. However, if the airbag detects an occupant who is lightweight—like a small child for example—it may only deploy at a reduced force. It may even not deploy at all, depending on the way it was designed and whether or not the belt was used to avoid injuries from the airbag. As already explained, the airbag should not deploy if the sensors detect no occupant or use of a seat belt. A good thing to remember, though, is that modern airbag systems are still being constantly improved. Airbags may work in a large percentage of cases, but there can be times they aren’t as successful.

If you are having problems with your seat belt vs airbag, this is something you should not ignore. Seat belts and airbags are the primary and secondary restraint systems in your vehicle, and mechanisms that should not be taken lightly. For seat belts in particular, you can either purchase new ones at the dealer or get them repaired at the company Safety Restore. The latter option is much more affordable and will yield the same results. You can rest assured that Safety Restore has quality and safety in mind when it performs the repairs. The company only uses industry standard tools and 100% OEM parts. It is also BBB accredited and carefully makes sure to meet FMVSS standards. To get seat belt repair, simply log onto safetyrestore.com! There you can purchase the service, before shipping out your belts to the company.

Airbag light comes on and off

The airbag light is one of those things you should definitely pay attention to. I say this because ignoring it can literally be the difference between your life and death. When the airbag light turns on, this means that the airbag system is not properly functioning. Therefore, if you were to find yourself involved in an accident or sudden stop, your airbags would not deploy—which we all know can result in serious injury or even death.

Make sure to pay attention that your airbag light works properly. If your vehicle—and airbag system—is working properly, the light should remain off. Or, in some vehicles, it may turn on for a few seconds along with all other displays and then immediately dim out. This is normal. If the light persists, however, this is when you should get your airbag system looked at!

You can either send your vehicle in to a trusted automotive shop, or purchase a scanning tool on your own to check for any fault codes or crash data in your vehicle’s SRS airbag control module. This module is a small device that will be able to tell you all you need to know about your faulty airbag system. Once any codes are detected, you should then proceed by getting them removed. This can be accomplished by either replacing the unit entirely with a brand new module, or buying software to reset the unit from home. There are numerous online resources detailing how the unit can be reset. If you don’t completely trust in your own abilities, you also have the option to send the unit in to Safety Restore. This company will completely eradicate all hard codes and crash data and will return a practically new module back to you. You’ll also have a lifetime warranty to go with it.

SRS Airbag Meaning

Do you know what the meaning of SRS airbag is? If not, let me fill you in.

SRS is an abbreviation for supplementary, or secondary, restraint system. This is what the airbag system is, and it consists of the actual airbags, the impact sensors, the seat belts, and the SRS airbag control module.

When the airbag light pops up on a dashboard, this means that there is something wrong with the airbag system and that the airbags will not deploy until that problem is dealt with. Resetting the SRS airbag module or purchasing a brand new one can solve the problem. Of course, the latter option is much more expensive. Therefore, attempting to reset the module on your own is probably your best bet.

To do this, you first want to locate the unit in your vehicle. Generally, airbag modules can be found underneath the driver’s seat. Then you want to disconnect your battery and move your steering wheel so that you can remove all the hardware on the driver airbag module. You want to make sure that all the wiring, horn wiring, grounding strap, airbag connectors, and radio wired are completely disconnected. Then proceed by removing the module. After opening it up, search for the 8-pin SMD EEPROM chip. Solder some 32-gauge hookup wires to connect the airbag module to a serial port EEPROM reader. The crash data can then be analyzed. Replace all the values from the crashed chip with the values found on the virgin chip. Then rewrite this into your computer in order for the hard codes to be eradicated. After that, you can replace the unit back into your vehicle. Your SRS airbag light should turn off and your airbags should be working properly again.

Of course, if the instructions above seem too difficult for your liking, you can send your unit in to the company Safety Restore. They will reset your SRS airbag module to factory settings and will not charge an arm and a leg for it either!

What does service airbag mean ?

There are many large vehicle repairs that people know about, such as changing a tire, getting an oil change, or switching out the battery. However, when it comes to smaller things like the service airbags, not many people know what exactly to do with them. However, they serve a very important role and should definitely be on the list of things to know about your car.

So what exactly does service airbag mean? Let me fill you in.

The service airbag message is something that can appear on the DIC of your vehicle, which stands for driver information center. This message can show up if there is an issue with the airbag system that needs to be resolved. The issue can be minor, or it can be something a lot more pressing—it may be telling you that your airbags will not deploy should an accident occur! This means that you will not be protected and can face some serious injury or possibly even death. Therefore, when you see the service airbag message pop up, you should immediately get it fixed. What you might also experience with the service airbag message popping up is your SRS airbag light turning on. This may occur if your car was previously involved in an accident that resulted in the activation of the crash sensors without the airbags actually deploying. As was already mentioned, this is just another reason to get your car looked at.

You definitely have a few ways you can go about handling both the service airbag message and SRS airbag light turning on. First, you can go to the dealer to buy a brand new SRS airbag module. If you are well versed in automotive repair, you also have the option of resetting the unit yourself. Of course, if you aren’t fully sure in your abilities, or don’t want to spend the money on software and tools, you can turn to the company Safety Restore to help.

Airbag Module Reset

Most drivers have experienced the dread of a dead battery. Batteries always seem to die at the worst times, such as on a cold morning before work. Dead batteries are a nuisance to drivers; however, drivers can take steps to promote the longevity of their batteries.

First, drivers should always check their batteries when weather changes. Extreme temperatures damage batteries in different ways. Cold air thickens engine oil, and this oil becomes harder to move and turn. While cold is harmful to the battery, heat will also do damage. Extreme heat causes fluids to vaporize and evaporate. As a result, the internal structure of the battery becomes damaged. Thus, whenever the temperature changes drastically, drivers should be prepared to check on their batteries. In addition, drivers should be sure not to overcharge their batteries. Overcharging can also affect the longevity of your battery. If there is a defect with a part of the charging system’s voltage regulator, charging can occur at a rate that is too high. The result of this is a battery that dies slowly.

Furthermore, there are simple things drivers can do to attempt to promote the life of their batteries. Whenever you charge your battery, check to make sure the electrical system is functioning at the appropriate rate. If you have a battery which needs to be topped off routinely, build these checks into your schedule so you do not forget. You may also consider adding distilled water when it is needed. When it comes time to replace your battery, it should be replaced with one that is rated as high as the original one. If the lights on your vehicle become increasingly dim (headlights, interior lights), you likely need to check your battery. The same goes if the check engine light comes on. Finally, keeping your battery clean increases battery life. Debris and dirt become conductors when they get into the battery, and drain battery power and lead to corrosion, which prevents flow.

Like batteries, airbags are essential to vehicles. If your vehicle requires airbag module reset, you cannot procrastinate fixing it. SRS Airbag module reset is necessary in vehicles that have been in accidents or impacts. Whether you were in an accident or purchased your vehicle from an auction, Safety Restore can provide airbag chip reset for you. Instead of spending $1,000 on a new airbag module from a dealership, Safety Restore provides airbag module resetting and essentially restores the original airbag module by erasing all the stored data. Safety Restore uses factory OEM software to complete your module reset, leaving your airbag module as good as new! Contact Safety Restore about having your airbag module reset today!

Does Your Deployed SRS Airbag Module Need to be Reset after an Accident?

SRS Airbag Module Deployed — Example of an srs airbag module that was reset after it was deployed during an accident.

Believe it or not, winter is right around the corner. If you are from a part of the country that experiences a harsh winter, you know that this dangerous time can wear out your vehicle. From heavy snow fall to black ice to below zero temperatures, roads in the winter season are riddled with danger. Each year, thousands of drivers end up stranded due to hazardous roads or malfunctioning vehicles, anywhere from short periods of time, to even days. Aside from the typical dangers of being on the road, there is also an increasing danger of hypothermia. Most drivers are not adequately prepared to be stranded, but you can take measures to ensure safety in the event you are stranded in your vehicle during a storm.

First, you should try to keep your vehicle fueled as much as possible in the winter time, especially when taking a long trip. In the event you are stranded, that gas in your tank might be all you have to keep warm for hours, if not days. You can also create a winter emergency kit to leave in your vehicle. Aside from the usual first aid kit, you should include emergency flares, flashlights, a radio, extra batteries, and ice scraper and a bag of sand to help with traction. You will also need to pack items to keep you warm if you are stranded for a length period of time, including: warm blankets, extra gloves, a ski mask to protect your face, extra warm clothing and boots. Make sure the clothing you choose is made of materials that insulate well, such as fleece. Finally, if you have an old cell phone that you no longer use, charge it and keep it in your car. Even if the phone is not connected to any provider, you will still be able to call 911 on it. Alternatively, you can keep a fully charged battery pack and charging cable for your phone.

Part of preparing for the winter season is ensuring your car is safe to drive. If your SRS airbag module has deployed, you likely need to have it repaired or replaced before the winter season. When the airbag module deploys, it became useless and now prevents airbags from deploying in an accident. Thus, there is a great risk to driving a vehicle with the SRS airbag module deployed. Whether you have been in a car accident or purchased a car from an auction, the airbag module should be repaired as soon as possible. While many manufactures and repair shops will suggest you replace the deployed SRS airbag module, Safety Restore repair it for a fraction of the cost, saving you upwards of $1,000! Do not risk driving in the winter season with a SRS airbag module deployed – contact Safety Restore today and get it taken care of before the first snow fall!