Ever wonder what the car seat laws are in Connecticut? If you live in the Constitution state, there are several things you should know about strapping your child into a car seat. This will ensure that you are driving safely and not endangering the lives of your children. Some of these rules may seem ridiculous to you as your child grows bigger, but they were established for a reason. Therefore, you should follow the precautions and do what the seat belt laws suggest.
First, it is important to note that Connecticut became the eighth state in the United States to accept the recommendations of the American Academy of Pediatrics in 2017. They followed the recommendation that young children should stay in rear-facing child restraints until the age of two. The age and weight requirements for the use of booster seats and car seats have also increased by Connecticut law. In order to outgrow a booster seat in Connecticut, a child must be eight years old and have a minimum weight of 60 pounds. This is meant to reduce the chances of injury or even death during intense acceleration or deceleration of a vehicle.
Under Connecticut law, all children under the age of two or weighing under thirty pounds must be strapped into a rear-facing child seat with a five-point harness.
Children between the ages of two and four, and weighing between thirty and thirty nine pounds, are required to be placed in either a forward-facing or rear-facing car seat with a five-point harness.
Children between the ages of five and seven, or weighing anywhere between forty and fifty nine pounds, must ride in a rear or forward-facing restraint held in by a lap and shoulder seat belt.
Any child or adolescent from the age of eight through fifteen years, who weighs sixty or more pounds, must use a government approved booster seat or a safety seat belt.
If you ever find your vehicle in an accident, your seat belts may deploy. This can give rise to crash data and hard codes being stored in your car’s SRS airbag module system. To ensure the safety of your passengers–including those strapped into car seats–it is crucial to take care of the problem immediately. You have the choice to go to a dealer to buy a new unit or turn to an airbag repair centre like the company Safety Restore. This latter option is much more reasonable. The SRS airbag reset service that this airbag repair centre provides costs only a fraction of buying a new unit at the dealer. Safety Restore also provides its customers with a lifetime warranty and performs the repairs in just 24 hours! What better airbag repair centre to turn to than Safety Restore?
Safety Restore is a company founded on the repair of seat belts that has expanded into the resetting of SRS airbag modules and the re-webbing of seat belts as well. Basically, Safety Restore can do it all when it comes to seat belts. Whereas other competing companies are only able to accomplish the simple, single stage seat belt repairs, Safety Restore can do single stage, dual stage, and even triple stage SRS seat belt repairs. They perform repairs on the pretensioner and seat belt retractor, depending on what the customer needs. The SRS seat belt repair service is compatible with all makes and models of vehicles. Also, the physical location of their customers does not matter. From their east coast location in Westfield, MA, Safety Restore welcomes customers from all over the country, and even overseas!
To get an SRS seat belt repair at Safety Restore, customers simply need to log onto their website, safetyrestore.com. Then, they can browse the services provided and select the one they are interested in–in this case being the SRS seat belt repair. All they would have to do then is prepay for the service, remove their seat belt(s) from their vehicle, and ship them out using any preferred carrier. Once the seat belt masters receive the shipment, they perform the repair work in just 24 hours and send the package back out to the customer.
The quick 24 hour turnaround time is not the only thing the company takes pride in. The high positive review count the company has gained from the start speaks volumes on the safety and quality of Safety Restore’s services. Only highly experienced and well-trained engineers are employed at Safety Restore. The company ensures that all repairs are performed using industry standard tools and 100% OEM parts. A dual pro system is in place to test each seat belt buckle pretensioner. When getting SRS seat belt repair, or any service, at Safety Restore, you can ret assured that FMVSS standards will be met, if not exceeded. Prices are unbeatable too. The price for SRS seat belt repair comes in at only $64.99-$114.99! That means hundreds, if not thousands, of dollars saved compared to heading to a dealer! In the very slim chance that something goes wrong with the seat belt, customers also have the capability to send the item back for re-work under the company’s lifetime warranty policy.
Found out that you need an SRS reset but don’t know exactly what it is or who to turn to for the job? Head over to Safety Restore to get the work done, and learn a little bit more of what an SRS reset really is.
An SRS airbag module is a computer system found in every vehicle that controls the entire airbag system. Everything from the impact sensors to the seat belts and airbags go through it. Even if your car is involved in a small fender bender, the airbag module can store crash data and hard codes as well as light up your airbag light. Your seat belts may become deployed as well and generate additional codes.
When you have an SRS airbag module that has stored hard codes and crash data, you want to remove those immediately. You can either purchase a brand new module at the dealer–which costs a lot more–or head on over to Safety Restore to have your SRS reset. The latter option is much more practical and affordable. Not only will you be saving money, but your safety will not be compromised in the least. Safety Restore removes and clears all hard codes and crash data, restoring your module to factory condition after the SRS reset. No additional programming is necessary!
You can be further assured of Safety Restore’s quality by the foundations the company operates by. Whether to complete an SRS reset or perform another service, Safety Restore only employs highly trained and experienced engineers. All repair work is completed using industry standard tools and 100% OEM parts. FMVSS standards have always been met or exceeded since the company began its practice. Additionally, all work is completed in just 24 hours or less, regardless of the amount of items sent in from a customer. This is especially useful for busy automotive shops. Furthermore, a lifetime warranty is guaranteed on all services. If anything goes awry in the future, customers can have the assurance that their item can be sent in for rework at no additional cost! Safety Restore works with customers all over the country, and even overseas! It welcomes all makes and models of vehicles as well.
To get an SRS reset, simply visit safetyrestore.com. Then, select the service for an SRS reset and pre-pay for it before sending your unit in to the company. Once they receive it, they will perform all necessary work to remove all hard codes and crash data! In just 24 hours your SRS reset will be completed and your unit will be shipped back out to you!
Need an SRS airbag reset but don’t know who to turn to? The perfect company to do this for you is none other than Safety Restore!
Safety Restore has held a successful and positive reputation for years when it comes to the repair of seat belts and SRS airbag resets. They have amassed quite a high positive review count to show from it. Just looking at the foundations of the company can draw you to see the quality–and safety–that they ensure in their services. Since the beginning, Safety Restore has only employed highly trained and experienced seat belt engineers. Repairs have always met or exceeded FMVSS standards. Additionally, only 100% OEM parts and industry standard tools are used in their work environment. Safety Restore works with customers throughout the country–even overseas–and welcomes all makes and models of vehicles. A quick 24 hour turnaround time is guaranteed to all customers, regardless of the amount of items being sent in for repair. Busy automotive shops have found this especially gratifying. Furthermore, the prices are unbeatable. Rather than spending hundreds, or even thousands of dollars, the most a customer will spend per item is $114.99 at Safety Restore. Getting an SRS airbag reset comes up at only $49.99! Plus, a lifetime warranty is added to all services completed by the company! If there ever was a bargain, this definitely is one!
As the SRS airbag module is such an important safety element in the vehicle, Safety Restore makes sure to restore it to its full potential. When performing the SRS airbag reset, the technicians remove all hard codes and crash data that have been stored in the system after an accident. Everything is restored to factory condition and no additional programming is necessary after that! Also, the annoying airbag light that turned on as a result of the accident immediately goes away after Safety Restore has performed its work on it!