Whether you are a new driver or have been driving for 50 years, knowing what all the safety signals on the dashboard of your vehicle is very important. This will ensure that if at anytime a light turns on you will know what to do. Here are a list of some safety signals that you should be aware of and what they mean.
If the Transmission Temperature Indicator light turns on it means the engine temperature has exceeded normal limits. You should check the coolant level, fan operation, radiator cap, and coolant leaks. If the Tire Pressure Warning Light Indicator light turns on it means the pressure is low in one of your tires, you should get them checked and put more air pressure in them. If the Check Engine or Malfunction Indicator Light Indicator light turns on the car’s diagnostic systems have detected a malfunction that needs to be checked and should not be ignored. If the Air Suspension Indicator light is on this means that there is a problem with the air suspension bags, likely due to a leak or inflation issue. The Gas/Fuel Cap Indicator light will turn on if the gas/fuel cap is not properly tightened. The Powertrain Fault Indicator light will turn on when a powertrain or AWD fault has been detected. If this light illuminates you should contact your mechanic as soon as possible. If Airbag Indicator light turns on this means the front airbag is switched off. If this lamp lights up or flashes there is a fault in the airbag or seatbelt system. If the Airbag Deactivated Indicator light turns on this means there is a fault in the rear spoiler system. There are so much more, but here are a few that should be known by everyone to ensure a safe drive.
If you have noticed there are two airbag indicator lights. Airbags should be taken very seriously because they are one of the main components that keep you and your passengers safe. If you do see one of the lights turned on, then you may need an airbag repair. Airbag repairs can cost a fortune at some dealerships, but Safety Restore is a company that can save you hundreds even thousands on repairs. Your SRS airbag repair service will be completed using industry-standard tools and 100% OEM parts. The best part yet, all repairs can be expected to be done in just a quick 24 hours or less, and have a lifetime warranty attached to it!
There are several lights on your vehicle’s dashboard. Each one illuminates indicating a particular problem. The airbag light is one that you may see light up several times. This is because when you just turn on your car, it briefly comes on to remind you to buckle up. The seat belt light is sometimes combined with the airbag light so it may get confusing to determine whether the light is lit due to seat belt issues or airbag issues. If you are buckled in, and the light is lit, then it is even more important not to ignore it as it may indicate that at least one of your airbags may not be working properly.
A lit airbag light can be an indication that something serious may be wrong with your airbags, so it should never be overlooked or avoided. If the airbag light is lit on your dashboard, the first thing you should do is check the car’s system for fault codes. If the airbag code is related to the airbag’s deployment, you will need your airbag light reset. Other reasons for a lit airbag light may be a result of issues with the seat belt system, the airbag, the computer, or associated wiring. Commonly, it is because something may be interfering with the seat belt switch(which determines if the seat belt is fastened), perhaps giving off a false warning. Other causes of the airbag light are due to the airbag being deactivated or even water damage. In order for the airbags to deploy, the car must be traveling between 8 mph and 14 mph. Most people driveway above those speeds, making it more important for the airbags to work properly in the event of an accident. It is important that you get airbag repair or reset service when necessary.
You should go to a mechanic for help diagnosing the computer code, which would tell you what the exact issue is. You can rely on Safety Restore for the airbag repair. They can save you hundreds by simply resetting your vehicles original airbag module and can even re-program the airbag module if necessary. To get started and check vehicle compatibility, visit SafetyRestore.com.
Every light on your dashboard lights up to inform you of a potential problem or that something is on/off. A common light would be the airbag light which you have probably seen light up many times before. When you turn on your car, The light briefly lights up to remind you to buckle up. Sometimes this light can be confusing though because the seat belt light and the airbag light are one and the same in some vehicles. If the light is lit but you are buckled in, then it is even more important not to ignore it as it may be an indication that at least one of your airbags may not be working properly. This is a very unsafe way to drive as it may not be able to protect you in the event of an accident.
If the airbag light is lit on your dashboard, the first thing you should do is check the car’s system for fault codes. You should go to a mechanic for help diagnosing the computer code, which would tell you what the exact issue is. If the airbag code is related to the airbag’s deployment, you will need your airbag light reset. Other reasons for a lit airbag light may be a result of issues with the seat belt system, the air bag, the computer, or associated wiring. Usually, it is because something may be interfering with the seat belt switch, giving off a potentially false warning. Other causes of the airbag light are due to the airbag being deactivated or even due to water damage. This may require you to get airbag repair.
You can rely on Safety Restore for the airbag repair and/or reset. They can save you hundreds by simply resetting your vehicles original airbag module and can even re-program the airbag module if necessary. They also offer several other services for your vehicles Supplemental Restraint system. All of them come with a lifetime warranty and a 100% satisfaction guarantee. To get started and to check vehicle compatibility, visit SafetyRestore.com
Have you recently been involved in a crash? Even if it was a simple fender bender, it may have wreaked havoc on your life with all the phone calls and appointments you already had to make. There are a few things you probably already did from the get-go, like schedule physical therapy (if you were injured from the crash), make sure that your insurance was involved, and ensure that the police had everything on file from the accident scene.
You likely also inspected your vehicle for any major external damage and made the proper phone calls to get those things repaired. However, you may not have paid much attention to the internal components, which can get just as badly damaged. Some of these components include the radiator, the brakes, the seat belts, and the airbag system.
First, lets talk about the brakes. The brakes are not the first things people think about after they are involved in an accident. However, they can certainly get pretty damaged after being heavily pressed on in an emergency stop.
The seat belts are another internal component that can get damaged after a crash. Usually, seat belts will get locked up or get blown, in which case repair of the internal components would be necessary to get them back to working order.
If the external damages happened on the front of the vehicle, the radiator is likely to have been damaged in some way. Therefore, this is one of the first things you should have checked out immediately after a crash.
Looking for a local airbag repair service? Safety Restore is located in Westfield, Massachusetts but services its customers nationwide, and even overseas! It is a company based on a ‘purchase first then send in your items in for repair’ model, so the location of customers does not make a difference. One of its main specialties is providing SRS airbag module resets for vehicles that have been involved in an accident.
When a vehicle is involved in a crash, the airbag light can appear on the dash and crash data and hard codes can be stored in the system. If the SRS airbag module is not properly functioning, it is crucial to have it reset for your own safety and the safety of surrounding drivers on the road. After all, it is responsible for all airbag related components in your vehicle including crash sensors, airbags, along with the steering wheel clockspring, seat belt retractors, seatbelt pretensioners and seat belt buckles. At Safety Restore, the skilled technicians erase all hard codes and crash data that are stored in the system, restoring the SRS airbag module to factory condition. No additional programming is necessary! If you are considering a local dealer to fulfill your airbag repair service needs, getting an SRS airbag module reset at Safety Restore is much more practical, and the quality is just as good! The company only employs highly experienced seat belt engineers. Your SRS airbag repair service will be completed using industry standard tools and 100% OEM parts. Not only that, but the company has always met or exceeded FMVSS standards! For their customers’ satisfaction, all repairs can be expected to be done in just a quick 24 hours or less, and have a lifetime warranty attached to it!