When to get airbag repair service

airbag-repair

There are several lights on your vehicle’s dashboard. Each one illuminates indicating a particular problem. The airbag light is one that you may see light up several times. This is because when you just turn on your car, it briefly comes on to remind you to buckle up. The seat belt light is sometimes combined with the airbag light so it may get confusing to determine whether the light is lit due to seat belt issues or airbag issues. If you are buckled in, and the light is lit, then it is even more important not to ignore it as it may indicate that at least one of your airbags may not be working properly.

A lit airbag light can be an indication that something serious may be wrong with your airbags, so it should never be overlooked or avoided. If the airbag light is lit on your dashboard, the first thing you should do is check the car’s system for fault codes. If the airbag code is related to the airbag’s deployment, you will need your airbag light reset. Other reasons for a lit airbag light may be a result of issues with the seat belt system, the airbag, the computer, or associated wiring. Commonly, it is because something may be interfering with the seat belt switch(which determines if the seat belt is fastened), perhaps giving off a false warning. Other causes of the airbag light are due to the airbag being deactivated or even water damage.
In order for the airbags to deploy, the car must be traveling between 8 mph and 14 mph. Most people driveway above those speeds, making it more important for the airbags to work properly in the event of an accident. It is important that you get airbag repair or reset service when necessary.

You should go to a mechanic for help diagnosing the computer code, which would tell you what the exact issue is. You can rely on Safety Restore for the airbag repair. They can save you hundreds by simply resetting your vehicles original airbag module and can even re-program the airbag module if necessary. To get started and check vehicle compatibility, visit SafetyRestore.com.

SRS Airbag Meaning

SRS Airbag Meaning

Do you know what the meaning of SRS airbag is? If not, let me fill you in.

SRS is an abbreviation for supplementary, or secondary, restraint system. This is what the airbag system is, and it consists of the actual airbags, the impact sensors, the seat belts, and the SRS airbag control module.

When the airbag light pops up on a dashboard, this means that there is something wrong with the airbag system and that the airbags will not deploy until that problem is dealt with. Resetting the SRS airbag module or purchasing a brand new one can solve the problem. Of course, the latter option is much more expensive. Therefore, attempting to reset the module on your own is probably your best bet.

To do this, you first want to locate the unit in your vehicle. Generally, airbag modules can be found underneath the driver’s seat. Then you want to disconnect your battery and move your steering wheel so that you can remove all the hardware on the driver airbag module. You want to make sure that all the wiring, horn wiring, grounding strap, airbag connectors, and radio wired are completely disconnected. Then proceed by removing the module. After opening it up, search for the 8-pin SMD EEPROM chip. Solder some 32-gauge hookup wires to connect the airbag module to a serial port EEPROM reader. The crash data can then be analyzed. Replace all the values from the crashed chip with the values found on the virgin chip. Then rewrite this into your computer in order for the hard codes to be eradicated. After that, you can replace the unit back into your vehicle. Your SRS airbag light should turn off and your airbags should be working properly again.

Of course, if the instructions above seem too difficult for your liking, you can send your unit in to the company Safety Restore. They will reset your SRS airbag module to factory settings and will not charge an arm and a leg for it either!