Whether you are a new driver or have been driving for 50 years, knowing what all the safety signals on the dashboard of your vehicle is very important. This will ensure that if at anytime a light turns on you will know what to do. Here are a list of some safety signals that you should be aware of and what they mean.
If the Transmission Temperature Indicator light turns on it means the engine temperature has exceeded normal limits. You should check the coolant level, fan operation, radiator cap, and coolant leaks. If the Tire Pressure Warning Light Indicator light turns on it means the pressure is low in one of your tires, you should get them checked and put more air pressure in them. If the Check Engine or Malfunction Indicator Light Indicator light turns on the car’s diagnostic systems have detected a malfunction that needs to be checked and should not be ignored. If the Air Suspension Indicator light is on this means that there is a problem with the air suspension bags, likely due to a leak or inflation issue. The Gas/Fuel Cap Indicator light will turn on if the gas/fuel cap is not properly tightened. The Powertrain Fault Indicator light will turn on when a powertrain or AWD fault has been detected. If this light illuminates you should contact your mechanic as soon as possible. If Airbag Indicator light turns on this means the front airbag is switched off. If this lamp lights up or flashes there is a fault in the airbag or seatbelt system. If the Airbag Deactivated Indicator light turns on this means there is a fault in the rear spoiler system. There are so much more, but here are a few that should be known by everyone to ensure a safe drive.
If you have noticed there are two airbag indicator lights. Airbags should be taken very seriously because they are one of the main components that keep you and your passengers safe. If you do see one of the lights turned on, then you may need an airbag repair. Airbag repairs can cost a fortune at some dealerships, but Safety Restore is a company that can save you hundreds even thousands on repairs. Your SRS airbag repair service will be completed using industry-standard tools and 100% OEM parts. The best part yet, all repairs can be expected to be done in just a quick 24 hours or less, and have a lifetime warranty attached to it!
There are several lights on your vehicle’s dashboard. Each one illuminates indicating a particular problem. The airbag light is one that you may see light up several times. This is because when you just turn on your car, it briefly comes on to remind you to buckle up. The seat belt light is sometimes combined with the airbag light so it may get confusing to determine whether the light is lit due to seat belt issues or airbag issues. If you are buckled in, and the light is lit, then it is even more important not to ignore it as it may indicate that at least one of your airbags may not be working properly.
A lit airbag light can be an indication that something serious may be wrong with your airbags, so it should never be overlooked or avoided. If the airbag light is lit on your dashboard, the first thing you should do is check the car’s system for fault codes. If the airbag code is related to the airbag’s deployment, you will need your airbag light reset. Other reasons for a lit airbag light may be a result of issues with the seat belt system, the airbag, the computer, or associated wiring. Commonly, it is because something may be interfering with the seat belt switch(which determines if the seat belt is fastened), perhaps giving off a false warning. Other causes of the airbag light are due to the airbag being deactivated or even water damage. In order for the airbags to deploy, the car must be traveling between 8 mph and 14 mph. Most people driveway above those speeds, making it more important for the airbags to work properly in the event of an accident. It is important that you get airbag repair or reset service when necessary.
You should go to a mechanic for help diagnosing the computer code, which would tell you what the exact issue is. You can rely on Safety Restore for the airbag repair. They can save you hundreds by simply resetting your vehicles original airbag module and can even re-program the airbag module if necessary. To get started and check vehicle compatibility, visit SafetyRestore.com.
Every light on your dashboard lights up to inform you of a potential problem or that something is on/off. A common light would be the airbag light which you have probably seen light up many times before. When you turn on your car, The light briefly lights up to remind you to buckle up. Sometimes this light can be confusing though because the seat belt light and the airbag light are one and the same in some vehicles. If the light is lit but you are buckled in, then it is even more important not to ignore it as it may be an indication that at least one of your airbags may not be working properly. This is a very unsafe way to drive as it may not be able to protect you in the event of an accident.
If the airbag light is lit on your dashboard, the first thing you should do is check the car’s system for fault codes. You should go to a mechanic for help diagnosing the computer code, which would tell you what the exact issue is. If the airbag code is related to the airbag’s deployment, you will need your airbag light reset. Other reasons for a lit airbag light may be a result of issues with the seat belt system, the air bag, the computer, or associated wiring. Usually, it is because something may be interfering with the seat belt switch, giving off a potentially false warning. Other causes of the airbag light are due to the airbag being deactivated or even due to water damage. This may require you to get airbag repair.
You can rely on Safety Restore for the airbag repair and/or reset. They can save you hundreds by simply resetting your vehicles original airbag module and can even re-program the airbag module if necessary. They also offer several other services for your vehicles Supplemental Restraint system. All of them come with a lifetime warranty and a 100% satisfaction guarantee. To get started and to check vehicle compatibility, visit SafetyRestore.com
Safety Restore is a company founded on the repair of seat belts that has expanded into the resetting of SRS airbag modules and the re-webbing of seat belts as well. Basically, Safety Restore can do it all when it comes to seat belts. Whereas other competing companies are only able to accomplish the simple, single stage seat belt repairs, Safety Restore can do single stage, dual stage, and even triple stage SRS seat belt repairs. They perform repairs on the pretensioner and seat belt retractor, depending on what the customer needs. The SRS seat belt repair service is compatible with all makes and models of vehicles. Also, the physical location of their customers does not matter. From their east coast location in Westfield, MA, Safety Restore welcomes customers from all over the country, and even overseas!
To get an SRS seat belt repair at Safety Restore, customers simply need to log onto their website, safetyrestore.com. Then, they can browse the services provided and select the one they are interested in–in this case being the SRS seat belt repair. All they would have to do then is prepay for the service, remove their seat belt(s) from their vehicle, and ship them out using any preferred carrier. Once the seat belt masters receive the shipment, they perform the repair work in just 24 hours and send the package back out to the customer.
The quick 24 hour turnaround time is not the only thing the company takes pride in. The high positive review count the company has gained from the start speaks volumes on the safety and quality of Safety Restore’s services. Only highly experienced and well-trained engineers are employed at Safety Restore. The company ensures that all repairs are performed using industry standard tools and 100% OEM parts. A dual pro system is in place to test each seat belt buckle pretensioner. When getting SRS seat belt repair, or any service, at Safety Restore, you can ret assured that FMVSS standards will be met, if not exceeded. Prices are unbeatable too. The price for SRS seat belt repair comes in at only $64.99-$114.99! That means hundreds, if not thousands, of dollars saved compared to heading to a dealer! In the very slim chance that something goes wrong with the seat belt, customers also have the capability to send the item back for re-work under the company’s lifetime warranty policy.