How The SRS Airbag Module Can Help Investigators Piece Back Information After A Crash

You may already know that your vehicle has an SRS airbag control module stored in it and that the entire airbag system runs through this unit. You may also be aware that your airbags will not deploy, or work in general, if there are any faults in the module. However, you may not know—or know to the full extent—why the airbag module is so important, especially when it comes to piecing the information together after a car accident. After reading everything below, perhaps you will get a better picture of what the module does and why it is so important!

Basically, when an accident occurs, the SRS airbag control module stores information from the event in the form of crash data and hard codes. Everything from the vehicle speed, throttle position, engine speed, and brake light switch position is recorded. The unit may also pick up seat belt pre-tensioner deployments, airbag deployments, seat belt use, and impact speed change. As you can imagine, that can go a long way in painting the picture of an accident scene.

For law enforcement, the SRS airbag control module is a complement to the on-ground investigation. With permission or a search warrant, police and investigators can extract the information from the car’s on-board diagnostic port. On a side note, the diagnostic port is what mechanics use to check what is wrong with a car, whether or not a car still has power, and the like. Once the investigators lay hands on this information, they can then proceed in printing out a report on it. When the data is good, it can help test the truth of eyewitness statements obtained at the scene of the accident.

Now that you have read through this, you know just how important the SRS airbag module is. You want to be mindful that it is operating the right way at all times. That way, if you need the information stored in the unit to benefit you in the court of law, you’ll have it. So if you need an SRS airbag module reset, get it immediately. Don’t wait off on getting the SRS airbag module reset for weeks, or even days. If you turn to the company Safety Restore for your module reset, you can expect great prices and a fast turnaround time. Plus, your crash data reset will come with a lifetime warranty!

I buy all my vehicles as repairables and am so glad to have found Safety Restore. These guys are great! I was referred…

Posted by Kestrel Schnabel on Monday, October 30, 2017

Why You May Need An Airbag Module Reset And What An Airbag Module Is In The First Place

There are many safety components in cars that people aren’t even aware about—or if they are, don’t pay much attention to. The simple things such as seat belts and the brake system are somewhat cared for, but others like the SRS airbag module aren’t. If you yourself haven’t ever heard about the SRS airbag control module and what it does, perhaps this will help fill you in.

First off, it’s important to know where this unit is located. The airbag module can usually be found underneath the driver or passenger’s seat. In certain cars, however, it is located underneath the radio, in the center console, or in the kick panel.

Basically what this unit does is store information, in the form of hard codes and crash data, when the vehicle is involved in a crash. Some of the key bits of data stored are the speed the vehicle was travelling at when the accident occurred, whether or not the brake light switch was turned on, the engine speed, and the throttle position. Some modules also record whether or not the passengers of the vehicle were wearing their seat belt, the impact speed change, any airbag deployments, and any seat belt pre-tensioner deployments.

This data can then potentially be used by an Accident Reconstructionist to help paint a picture of the accident scene. More often than not, this information is favored over any eyewitness reports.

The importance of the SRS airbag control module is that the entire airbag system runs through it. That means each of the airbags in the vehicle—and there are many, if you think about it—rely on this small unit to operate. Essentially, if a vehicle is involved in a crash and has all these codes stored in its airbag module, the airbags will not work whatsoever until the module is repaired or altogether replaced.

If you are facing this issue in your own car and want to save yourself the hundreds of dollars necessary for module replacement, you can instead opt for an airbag module reset. By turning to the company Safety Restore for an airbag module reset you will not only be paying a fair price, but you will also be left with a lifetime warranty guarantee. The crash data reset will be completed in just 24 hours or less so you can be driving with properly functioning airbags once again in no time! Visit safetyrestore.com and select the airbag module reset service today!

I had my 2019 chevy express van, srs module and seatbelt pretensioners repaired by Safety Restore. Absolutely the best service and quick turnaround !!!

Posted by Jo John on Thursday, May 16, 2019

The Importance Of An SRS Airbag Reset

You may have heard friends or family members talking about needing to get an SRS airbag reset but have never understood what they meant, or what an SRS airbag even was! Because the SRS airbag control module is such an important unit in your vehicle, it would behoove you to learn a little bit more about the role it plays in the overall function of your vehicle. Hopefully you will learn some of that below.

To start off, it is vital that you know where the unit is located in your car. That way, if you have to have it replaced, you’ll know where to look! In most cars, the module can be located underneath the passenger or driver’s side seat. Sometimes, though, it can be found in the kick panel, below the radio, behind the steering wheel, or in the center console.

You’ll know that an SRS airbag reset is necessary if your car has recently been involved in a crash. That is because when a car is involved in a crash, the module automatically stores information from the crash in the form of hard codes and crash data. When this data is present, the airbags will stop working. That is why getting an SRS airbag reset immediately after a crash is so important. You don’t want to face a situation where you need the airbags to protect you and not have them work!

Another obvious reason to get an SRS airbag reset is if the airbag light suddenly turns on in your dash. If this light turned on in your car, that means the computer sensed a fault inside of the airbag system and is trying to tell you to fix it right away. Again, you don’t want to put off getting this repair, as it may be detrimental to both your safety, as well as the safety of the passengers in your vehicle!

A tried and trusted company that specializes in the resetting of SRS airbag modules is Safety Restore. Safety Restore offers affordable repair services, a quick 24-hour turnaround time, experience working with all makes and models of vehicles, plus a lifetime warranty on all services. Visit safetyrestore.com and order an airbag module reset today!

You guys rock !!! Cant say enough good things about this company ! Sent them a 2015 Hyundai Elantra SRS module, quick turn around and you can't beat the price !

Posted by Ricky Morgan on Saturday, March 30, 2019

Why Getting An Airbag Module Reset Is So Important

Don’t wait to get your airbag module reset

The SRS airbag module is a very important safety component of a vehicle. It is located in all vehicles, usually underneath the driver’s seat or front passenger’s seat. Sometimes, it can be found in the kick panel, center console, behind the steering wheel, or underneath the radio. The reason it is so important is because it is part of the airbag system—and as we know, the airbags are important safety features in a vehicle. As a matter of fact, the airbags serve as the secondary, or supplementary restraint systems, right alongside the seat belts—which we all grew up learning the importance of. The seat belts and airbags work hand in hand to protect the driver and any occupants in a vehicle. The seat belts work by restraining the occupants so that if an accident were to occur they would not propel out of a vehicle, bump against internal components, or hit each other. The airbags help by protecting the occupants from severe injury. They do so by masking their impact against the steering wheel or the seat in front of them when a crash occurs. The thing is when a car is involved in a crash, the seat belts can lock up or get blown and the SRS airbag unit will likely develop crash data and hard codes. Both become an issue to the safety and function of the vehicle. If the seat belts lock up or are blown, they will not be able to be used. The SRS airbag control module storing crash data and hard codes is a whole other issue. When this data is stored, nothing but an airbag module reset will be able to get rid of it. The problem is until the airbag module reset is performed, the airbags in the vehicle will not work at all. That is why it is essential to purchase the best airbag module reset tools and get the unit reset immediately. Or, you can go to the dealer and purchase a brand new module. Of course, if you aren’t very tech or car savvy, and you don’t have the extra cash lying around required for a new module at the dealer, you may want to look into another option. That option would be Safety Restore. Safety Restore is a company that specializes in the resetting of SRS airbag modules, as well as repairing seat belts. You can even send your seat belts and SRS airbag control module all in one order and have the company repair the units for you! Safety Restore is affordable, trustworthy, and definitely the practical choice for drivers recently involved in a crash.

I have used Safety Restore twice now and in both cases the seatbelts and air bag modules were fixed without a hitch. …

Posted by Dan Jackson on Friday, October 5, 2018

Subaru Impreza Airbag Light Reset

Get a Subaru Impreza Airbag light reset

There are so many lights on the dashboard, it is easy to ignore one that is lit up. However , if your airbag light is on, it should be addressed as it may indicate a real issue. You may be in need of getting your airbag light or module repaired or reset.

An airbag module is like the control center of your cars Supplemental Restraint System, also known as the SRS. It uses sensors in your Subaru Impreza to determine what action is necessary when something occurs to your vehicle, like an accident.

There are a few culprits to the airbag light lighting up, all of which should not be ignored. The issue can lie with your seat belts not working properly. Seat belts are the first line of defense in the event of an accident, so you want to make sure they are always working. Another issue could be potential water damage to the SRS sensors. This can result in the module not being able to do its job. The SRS light can also light up if the vehicle has been in an accident recently or the seat belts get messed around with. For example, if the seat belt gets jerked, the airbag module triggers the seat belt to tighten and lock, putting that individual into their seat firmly. The airbags have not been deployed since it is not required to keep the person safe. However, in the event of a collision occurs, the module determines that both the seat belts as well as the airbags need to get activated. If your airbags have deployed you will need to get a Subaru Impreza Airbag light reset or repair service. You want to make sure your airbags, seatbelts and all other parts of your Subaru Imprezas SRS will work properly if an accident occurs.

Safety Restore can get you back to safety with a Subaru Impreza Airbag light reset or module repair, while saving you hundreds as compared to a dealer! If you decide to buy a new or used one instead of repairing or resetting the old one, they can also reprogram the module at the same time. Whether you get a used or new module, it will need to get re-programmed to your vehicles VIN. This can be part of a lengthy, difficult, and costly process. Safety Restores process is quick, simple, and affordable. They have a 100% satisfaction guarantee. The expert technicians will do the service and ship it back within only 24 hours of receiving your module. They also offer several other services for your Supplemental Restraint System, making sure everything meets safety guidelines. Visit SafetyRestore.com.

Subaru Legacy Airbag Light Reset

Do you need a Subaru Legacy Airbag light reset?

Your car’s Dashboard has several things indicating various things. Everything from speed, traveled distance, fuel, seat belt, and more. However , one major light that should never be ignored is the airbag light. It may indicate a serious problem.

An airbag module is like the control center of your cars Supplemental Restraint System, also known as the SRS. It uses sensors in your Subaru Legacy to determine what action is necessary when something occurs to your vehicle, like an accident.

There are a few reason as to why the airbag light may be lit. One common issue can lie with your seat belts not working the way they should be. Did you know there is a 1 in 84 chance of dying when in a auto accident? That number gets cut in half with the proper use of a seat belt. Another issue could be potential water damage to the SRS sensors. This can result in the module not being able to do its job. The SRS light can also light up if the vehicle has been in an accident recently or the seat belts getting jerked. If the seat belt gets jerked, the airbag module triggers the seat belt to tighten and lock. The airbags do not need to get deployed in this case. In the event of an accident, the module determines that both the seat belts as well as the airbags need to get activated in order to keep the individual safe. If your airbags have deployed you will need to get a Subaru Legacy Airbag light reset or repair service.

A dealer may charge you hundreds, even up to a $1,000! Safety Restore can get you back to safety with a Subaru Legacy Airbag light reset or module repair for only $49.99! Safety Restores process is quick, simple, and affordable. They have a 100% satisfaction guarantee. The expert technicians will do the service and ship it back within only 24 hours of receiving your module. They also offer several other services for your Supplemental Restraint System like Seat belt replacement, seat belt webbing repair, cluster repair, as well as custom colored seat belts! Visit SafetyRestore.com to see how they can help you get back on the road safely. Ensure that you, along with those driving in your Subaru are fully protected in the event something happens on the road.

VW Jetta Airbag Light Reset

Need VW Jetta Airbag light reset?

If you have been in an accident recently or your airbag light is on, do not hesitate to get it looked at. This is also true if your Jetta is a salvage. You may be in need of getting your airbag light or module repaired or reset.

An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your VW Jetta to determine what action, if any at all, is necessary when your vehicle has been in an accident or collision.

There are a few reasons why the airbag light may come on, all of which should not be ignored. One of these issues could be with your seat belts. Another issue could be potential water damage to the SRS sensors. The SRS light can also light up if the vehicle has been in an accident recently.

An accident can be at different extremes, resulting in various safety features activating. For example, if the seat belt gets jerked, the airbag module triggers the seat belt to tighten and lock. This puts the person in their seat firmly. In a situation like this, the airbags are not needed. If a collision occurs, however, both the seat belts as well as the airbags get activated by the airbag module. If your airbags have deployed you will need to get a VW Jetta Airbag light reset or repair service. You want to make sure your airbags, seatbelts and all other parts of your VW Jettas SRS will work properly if an accident occurs.

A dealer is likely to tell you that you need to get a new airbag module, which can cost you upwards of $1,000 dollars. Whether you get a used or new module, it will need to get re-programmed to your vehicles VIN. This can be part of a lengthy, difficult, and costly process. However, Safety Restore can get you back to safety with a VW Airbag light reset or module repair, while saving you hundreds! They can also reprogram the module at the same time. They have a 100% satisfaction guarantee. Their expert technicians will do the service and ship it back within only 24 hours of receiving your module. Visit SafetyRestore.com to get started and to learn more about all the other fantastic services they offer for your Jettas Supplemental Restraint System.

What is the airbag control module?

If you haven’t yet heard about the airbag control module in your vehicle, there is a lot for you to learn. This unit—though small compared to other parts of your vehicle—serves a crucial role in preserving your safety and operating your vehicle.

Wondering what the airbag control module is?


Basically put, the entire airbag system runs through and operates by the airbag control module. Without the module, the airbags in your vehicle would not work, or would deploy, during a sudden stop or collision. As a result, driving without a properly operating airbag control module can serve as a giant safety hazard. During a collision, airbags are what prevent occupants of a vehicle from colliding into other objects or people inside the vehicle or from completely projecting through the windshield. Without an airbag control module present, both drivers and passengers alike would not have such protection.


What is also important about the airbag control module is that it stores crash data and hard codes. This information is what courts sometimes retrieve and use to decipher the events leading up to and during a crash. The unit can store vehicle and engine speed, throttle position, brake light switch position, seat belt use, impact speed change, and airbag and pre-tensioner deployments. This is quite a bit of useful information stored in one simple module.


Heavy-duty vehicles such as trucks and buses are equipped with something similar to an airbag control module—an engine control module, or ECU. ECUs actually record a lot more information than airbag control modules do—they can store information up to 60 seconds before a crash!


After airbags deploy, nothing but a reset or getting a brand new unit will allow you to get rid of the codes. The first option is much more practical and affordable. A company that can do an airbag control module reset for you is Safety Restore.

Video – What is the airbag control module?

Will my car run without an airbag module?

In life, there are many chances we can take. However, that doesn’t mean that all of them are wise decisions or ones we should be taking. Driving a car without an airbag module is a perfect example of this. Although a car certainly can run without an airbag module installed, it definitely does not benefit anyone in the vehicle. If your car has a faulty airbag module or is ridden with hard codes and crash data, it should be reset immediately!

Without a properly functioning airbag module, passengers of a vehicle are basically saying no to airbags. That is because without an airbag module, the entire airbag system does not function. As you can imagine, this can pose as a huge problem. Airbags are what prevent many serious injuries and even death from occurring, as they serve as secondary restraints alongside seat belts. The change of momentum and force that an occupant of a vehicle experiences during a collision is lessened with the presence of airbags.

Wondering if your car will run without an airbag module?

An owner or operator of a vehicle should check if their airbag module is working at all times. If it is not, a new one should be purchased or the old one reset. If needed, alternative transportation should be arranged, so as not to jeopardize safety in any way. This is a serious matter and shouldn’t be taken lightly.

Although some people choose to purchase a brand new airbag module after theirs becomes faulty following a crash, there are other alternatives. Special tools and software could be purchased to reset SRS airbag modules to factory settings at home. The wiser—and more affordable—alternative to that would be to send the faulty airbag module system to a company that specializes in fixing SRS airbag modules. An example of such a company is Safety Restore.

Seat Airbag Repair

Side Note: Click here for seat belt repair and click here if your airbag light is on and you need to turn it off by resetting your airbag module.

Seat Airbag Repair
Is your seat belt needing repairs after an accident? Or maybe your airbag light and you need to turn it off by resetting your airbag module? Safety Restore can get it done for you.

Knowing how crucial seat belts are, it is not surprising that there are many different kinds of belts available. The different belts work in their own ways to administer to the type of motor vehicle they are equipped in. To name a few, there are lap belts, sash belts, three-point belts, and automatic seat belts. Below are a few characteristics setting each type of safety belt apart from another.

To begin with, there is the lap belt. This particular belt crosses over the waist and is adjustable. Lap belts can often be found in older cars. Nowadays, however, these types of belts aren’t seen as often, other than in some rear middle seats.

A sash belt is another type of seat belt. It is also adjustable but crosses over the shoulder of a person. This type of belt was more prevalent in the 1960s, and is used less today. Because it is quite easy to slip out of this type of belt during an accident, other belts are preferred over this one.

Some vehicles are equipped with shoulder belts that move forward automatically to shield an occupant once the vehicle is running. These are called automatic seat belts. With these belts, there is also a separate lap belt–which needs to be manually fastened. Due to the airbag being a mandatory component in vehicles in many countries, these type of belts have become less popular recently.

Then there are three-point belts. Three point belts share some similarities with the shoulder and lap belts. The three-point seat belt has a single continuous length of webbing. This seat belt, similar to the sash and lap seat belts–helps to spread out the energy of a moving body over the pelvis, chest, and shoulders during an accident. As a result, it provides the best protection to occupants of a vehicle compared to other belts. Most cars are equipped with this three-point seat belts.

Regardless of the type of seat belts that are found in your motor vehicle, they may deploy following an accident. This can result in codes being generated in the SRS airbag module of your vehicle. After an accident, the module may also store crash data and hard codes. The company Safety Restore has a seat airbag repair service to fix this exact issue. Rather than buying a brand new module at the dealer, customers can purchase a seat airbag repair and send in their existing unit to be restored. The unit is returned to its factory condition and all hard data and crash codes are eliminated. The seat airbag repair is priced very reasonably at only $49.99 and comes with a lifetime warranty. The repair work takes the company only 24 hours to complete!