No products
Now It Is Possible For You To Save Money By Repairing An Airbag Module Rather Than Replacing It
Airbags are a very important part of any modern car. This is why it is of the utmost importance that your airbag system should be able to work perfectly at all times. When your airbag is activated, it helps to prevent any type of serious body injuries. If a collision takes place the air bag inflates automatically cushioning the body from slamming into parts of the car.
So you've taken it upon yourself to learn how to repair airbag module. This part can be tricky and if you don't know what you are doing and do it wrong, it could be very counterproductive.
Tips to repair airbag module
Here are some useful tips:
Step 1: Before you take it upon yourself to learn how to repair airbag module, it is advisable that you disconnect the battery before starting.
Step 2: Now it is time for you to take out the airbag fuse which is located in the dashboard connector. Undoing this will ensures that when touching the airbag, it doesn't go off. Then remove the paneling which is covering the airbag. You should gently and slowly take out the airbag from its storage position. It is advisable that the electrical couplings will be disconnected from the rear of the airbag itself before removing the airbag.
Step 3: It is necessary that you ground the vehicle and yourself before you continue. This is because static electricity will even be deployed in your new airbag while it is being replaced, this ensures that no serious injury occurs.
Before installing the new air bag it is necessary that the electrical couplings are reconnected before it is being installed in the airbag compartment. Close the compartments, reset the system fuse and connect the battery again.
A very crucial part of your airbag system is its computer. It is necessary to have an excellent airbag computer, reason being that only a good airbag computer is able to access the situation should your vehicle be involved in an accident. It will be able to record the crash data. This is why it is the airbag computer module which decides whether or not to deploy the airbag. It is for this reason that the timing is important with regards to your safety. This is all the more reason for the airbag computer to be in perfectly working order at all times.
Other than replacing the airbag it will also be necessary for you to have the module reset. In this case it will be necessary for you to find an expert who specializes in your particular make and model of your car. It is these specialists who will be able to remove the crash data after resetting your airbag module. It is only after that the light of your airbag will go out and your airbag system will be like new.
