Why Seat Belt Cannot Pull Out

Reasons why seat belt cannot pull out

Seat belts are made to keep you safe on the road in your vehicle. A seat belt tightens in the event of a collision, keeping you firm in your seat. This helps minimize any damage that may occur to an individual. However, sometimes, the seat belt locks and you may be wondering why seat belt cannot pull out – even when it shouldn’t.

Your seat belt was made to lock up at specific times by utilizing a device called a retractor. This device looks like a spool with teeth on the edges of it. The retractor will usually allow your seat belt to extend and retract freely. However, in the event of a collision and/or sudden braking, the retractor will lock the seat belt. This prevents it from extending any further than it already is, keeping the individual in their seat.

Your seat belt not pulling out even though you have not been in an accident or had any sudden speed changes may be due to several reasons. For example, if you lean in forward to quickly, the retractor may sense that you have hit something, and engage. This might also occur if you lean forward and the driver hits the brakes. Another time the seat belt locks and you can’t pull out the seat belt would be if you are descending a steep downward road.

Once the retractor is activated, locking the seat belt, the belt has to fully retract before you can extend it again. If this occurs frequently whenever you try to pull on it, there is a good chance that there is an issue with the calibration and sensitivity to the machine. This would be a good time to get it inspected and cleaned. Visit SafetyRestore.com to see what they can do for you in this case.

Leave a Reply

Your email address will not be published. Required fields are marked *