Getting into an accident can be one of the most traumatizing things that can happen to a person, especially when it’s a head on collision and the airbags end up deploying. There are other times where the accident was not so severe and the airbags did not deploy. Many things will have to be replaced; the airbags if deployed, things that got wrecked outside of the car, but one of the most important components is the airbag module. An airbag module is also known as the airbag sensor, diagnostic unit, and computer module is responsible for receiving information from the collision sensor. That information is then transmitted to the airbag sensors and the airbags are deployed during a collision.
Therefore, having a faulty airbag module may result in the airbags not deploying when needed and may have an outcome that can endanger everyone in the vehicle. All vehicles have an airbag module that stores information. Furthermore, during a collision, the data is stored in the air bag module. You will realize this because your airbag light will turn on until the airbag module is replaced or fixed. This information provides the airbag module useless and owners usually replace it. When a car gets into an accident, the SRS airbag module records codes in its memory that contain crash information, and then it becomes “locked” until fixed or replaced This is because the car will no longer be safe to drive. However, if the accident was minor, the vehicle can return to the road, but the SRS airbag comfort modules need to be reset.
Getting your airbag module reset does not have to cost you an arm and a leg, a company like Safety Restore offers airbag module reset with the original air bag module, but any crash data hard codes are reset. Not only is this a cheaper option, but you are also not wasting a module. This company uses an OEM factory installed program to erase the crash data for airbag module reset. This process of airbag module reset leaves the airbag module good as new, saving you hundreds of dollars. If the airbag light is on in your vehicle, getting your airbag module reset is not only a good idea but necessary, there may be a time when you will need your airbags to work the most.
Found out that you need an SRS reset but don’t know exactly what it is or who to turn to for the job? Head over to Safety Restore to get the work done, and learn a little bit more of what an SRS reset really is.
An SRS airbag module is a computer system found in every vehicle that controls the entire airbag system. Everything from the impact sensors to the seat belts and airbags go through it. Even if your car is involved in a small fender bender, the airbag module can store crash data and hard codes as well as light up your airbag light. Your seat belts may become deployed as well and generate additional codes.
When you have an SRS airbag module that has stored hard codes and crash data, you want to remove those immediately. You can either purchase a brand new module at the dealer–which costs a lot more–or head on over to Safety Restore to have your SRS reset. The latter option is much more practical and affordable. Not only will you be saving money, but your safety will not be compromised in the least. Safety Restore removes and clears all hard codes and crash data, restoring your module to factory condition after the SRS reset. No additional programming is necessary!
You can be further assured of Safety Restore’s quality by the foundations the company operates by. Whether to complete an SRS reset or perform another service, Safety Restore only employs highly trained and experienced engineers. All repair work is completed using industry standard tools and 100% OEM parts. FMVSS standards have always been met or exceeded since the company began its practice. Additionally, all work is completed in just 24 hours or less, regardless of the amount of items sent in from a customer. This is especially useful for busy automotive shops. Furthermore, a lifetime warranty is guaranteed on all services. If anything goes awry in the future, customers can have the assurance that their item can be sent in for rework at no additional cost! Safety Restore works with customers all over the country, and even overseas! It welcomes all makes and models of vehicles as well.
To get an SRS reset, simply visit safetyrestore.com. Then, select the service for an SRS reset and pre-pay for it before sending your unit in to the company. Once they receive it, they will perform all necessary work to remove all hard codes and crash data! In just 24 hours your SRS reset will be completed and your unit will be shipped back out to you!
Need an SRS airbag reset but don’t know who to turn to? The perfect company to do this for you is none other than Safety Restore!
Safety Restore has held a successful and positive reputation for years when it comes to the repair of seat belts and SRS airbag resets. They have amassed quite a high positive review count to show from it. Just looking at the foundations of the company can draw you to see the quality–and safety–that they ensure in their services. Since the beginning, Safety Restore has only employed highly trained and experienced seat belt engineers. Repairs have always met or exceeded FMVSS standards. Additionally, only 100% OEM parts and industry standard tools are used in their work environment. Safety Restore works with customers throughout the country–even overseas–and welcomes all makes and models of vehicles. A quick 24 hour turnaround time is guaranteed to all customers, regardless of the amount of items being sent in for repair. Busy automotive shops have found this especially gratifying. Furthermore, the prices are unbeatable. Rather than spending hundreds, or even thousands of dollars, the most a customer will spend per item is $114.99 at Safety Restore. Getting an SRS airbag reset comes up at only $49.99! Plus, a lifetime warranty is added to all services completed by the company! If there ever was a bargain, this definitely is one!
As the SRS airbag module is such an important safety element in the vehicle, Safety Restore makes sure to restore it to its full potential. When performing the SRS airbag reset, the technicians remove all hard codes and crash data that have been stored in the system after an accident. Everything is restored to factory condition and no additional programming is necessary after that! Also, the annoying airbag light that turned on as a result of the accident immediately goes away after Safety Restore has performed its work on it!