If you ever had the question “Will an airbag deploy if the seat belt is not on?” on your mind, I am here to help!
The thing is, seat belts and airbags work together as our restraint systems in the time of a crash or sudden stop. The seat belts in our vehicles serve as primary restraint systems, while the airbags are the supplementary, or secondary, restraint systems. Both are very important for our overall safety on the road. Seat belts work by securing an occupant into his or her seat so as not to project out of it—and possibly out of the vehicle altogether—when a collision occurs. Airbags work to cushion the blow upon impact of an occupant against their vehicle. Airbags mainly protect the head and chest area of the body.
Seat belts and airbags are linked together by a unit in vehicles called the SRS airbag module. The airbag light in a vehicle ties into this system. It may turn on because of an airbag fault, problems with the airbag module or any of the following airbag components: faulty seat belt pretensioners, deployed airbags, faulty airbag clock spring, faulty crash sensors, stored crash data, or problems with the wiring harness.
Some automotive manufacturers program vehicles’ ECUs to make a split second decision whether or not to deploy the airbags to prevent injury to the occupant’s head. Therefore, for some models and automotive manufactures, seat belts certainly are required to be fastened in order for the airbags to operate correctly.
However, in many vehicles the airbags will still deploy whether or not an occupant is fastened by a safety belt. Unfortunately for the occupant, not wearing a seat belt and crashing into an airbag can yield much more serious injuries than if a seat belt were worn.
Keep seeing that pesky airbag light shining on your dash and know that nothing else will help but an airbag light reset? Head on over to Safety Restore and they can get that taken care of for you.
That airbag light showing up on your dash is just another result of your car being involved in an accident. When a vehicle has been involved in a crash, the SRS airbag module in the vehicle may store crash data and hard codes. The entire airbag system including everything from impact sensors to airbags and seat belts go through the SRS airbag module computer, so the airbag light turns on as a result.
At Safety Restore, the engineers are able to remove all crash data and hard codes that are stored in the SRS airbag module system. Their services are 100% guaranteed and no additional programming is necessary! The unit is restored back to factory condition, and customers are spared from paying hundreds, if not thousands of dollars by replacing the unit entirely at the dealer! Instead, they only have to pay a very reasonable $49.99 to reset their existing unit.
You can rest assured that having your airbag light reset done at Safety Restore will be done with quality and more importantly, that you will be driving on the road safely again. The company only employs highly trained and experienced seat belt engineers who complete the work using 100% OEM parts and industry standard tools. Safety Restore has also always had a 24 hour turnaround time in place and a lifetime warranty backs up all services. They also work with all makes and models of vehicles from customers throughout the nation and even oversees!
So why not get an airbag light reset here and now! Visit safetyrestore.com and select the service for an SRS airbag module reset, pre-pay for the unit, remove it from your vehicle, and ship it out to Safety Restore using any carrier you prefer. The rest is a waiting game–and a quick one at that! In just 24 hours of receiving your unit, the airbag module masters will have it reset to factory condition and shipped back to you! All your hard codes and crash data will be eliminated! You will no longer need to have a pesky airbag light staring at you, reminding you that you may be compromising not only your safety, but the safety of drivers around you!
Most drivers have experienced the dread of a dead battery. Batteries always seem to die at the worst times, such as on a cold morning before work. Dead batteries are a nuisance to drivers; however, drivers can take steps to promote the longevity of their batteries.
First, drivers should always check their batteries when weather changes. Extreme temperatures damage batteries in different ways. Cold air thickens engine oil, and this oil becomes harder to move and turn. While cold is harmful to the battery, heat will also do damage. Extreme heat causes fluids to vaporize and evaporate. As a result, the internal structure of the battery becomes damaged. Thus, whenever the temperature changes drastically, drivers should be prepared to check on their batteries. In addition, drivers should be sure not to overcharge their batteries. Overcharging can also affect the longevity of your battery. If there is a defect with a part of the charging system’s voltage regulator, charging can occur at a rate that is too high. The result of this is a battery that dies slowly.
Furthermore, there are simple things drivers can do to attempt to promote the life of their batteries. Whenever you charge your battery, check to make sure the electrical system is functioning at the appropriate rate. If you have a battery which needs to be topped off routinely, build these checks into your schedule so you do not forget. You may also consider adding distilled water when it is needed. When it comes time to replace your battery, it should be replaced with one that is rated as high as the original one. If the lights on your vehicle become increasingly dim (headlights, interior lights), you likely need to check your battery. The same goes if the check engine light comes on. Finally, keeping your battery clean increases battery life. Debris and dirt become conductors when they get into the battery, and drain battery power and lead to corrosion, which prevents flow.
Like batteries, airbags are essential to vehicles. If your vehicle requires airbag module reset, you cannot procrastinate fixing it. SRS Airbag module reset is necessary in vehicles that have been in accidents or impacts. Whether you were in an accident or purchased your vehicle from an auction, Safety Restore can provide airbag chip reset for you. Instead of spending $1,000 on a new airbag module from a dealership, Safety Restore provides airbag module resetting and essentially restores the original airbag module by erasing all the stored data. Safety Restore uses factory OEM software to complete your module reset, leaving your airbag module as good as new! Contact Safety Restore about having your airbag module reset today!
A seat belt repair kit might have been an idea that one has suggested to get your locked seat belt repaired, but it certainly isn’t an option. There simply isn’t a repair kit for seat belts. So if your vehicle has been in an accident, you need a repair service to get your seat belts working like new again. Here at Safety Restore we specialize in seat belt repair services after accident. Starting at only $65, you can get your seat belts rebuilt to their OEM! A seat belt repair kit is not necessary and no need to spend extra time and money trying to figure something out that doesn’t exist. Our seat belt repair service is compatible with all makes & models and comes with Lifetime Warranty. In addition, all repairs are done in 24 hours or less using OEM parts. You cannot go wrong with our seat belt repair service that surpasses any idea of a seat belt repair kit. So if the question of a seat belt repair kit ever arose, know that a seat belt repair service is your answer. To get started with your seat belt repair, visit our online store and buy the Seat Belt Repair Service.
Safety Restore is located at:
40 Main St. Westfield, MA 01085
Questions? Call 855-552-7233 M-F 9-8 EST Text us anytime! 413-454-5570