After an accident, a vehicle may need various repairs such as paint fixes, engine repairs, and so forth. Other parts may need to be replaced instead of replaced. This may include the bumper or even car seat (if you have one inside the vehicle). Just like you would need to replace the car seat after every accident to ensure the car seat is working the way it should, you would also need to get the airbag light reset if your airbag light is lit.
A lit airbag light can be an indication that something serious may be wrong with your airbags, so it should never be overlooked or avoided. If the airbag light is lit on your dashboard, the first thing you should do is check the car’s system for fault codes. If the airbag code is related to the airbag’s deployment, you will need your airbag light reset. Other reasons for a lit airbag light may be a result of issues with the seat belt system, the airbag, the computer, or associated wiring. Commonly, it is because something may be interfering with the seat belt switch, perhaps giving off a false warning. The seat belt switch detects if the belt is fastened. Some people put things under the seat and damage the wires.
You should go to a mechanic for help diagnosing the computer code, which would tell you what the exact issue is, Once you determine that, you can go to a professional to have it fixed. If you go to a dealer to help with the airbag light, they may inform you that you need to get an entirely new airbag module. Not only can this cost you as much as $1,000 dollars but it is not always necessary. Even if you get a used airbag module, you may be looking at extra unnecessary expenses since both a user and a new airbag module need to be re-programmed to your vehicles VIN. Instead, you can rely on Safety Restore. They can save you hundreds by simply resetting your vehicles original airbag module and can even re-program the airbag module if necessary. To get started and check vehicle compatibility, visit SafetyRestore.com.
An airbag is one of the most important components of any vehicle, an airbag is made to save you from hitting the windshield when you are in a high speed collision with another car or an obstacle on the road. That is why it is very important to make sure the airbag works properly.
If your airbag light seems to be blinking it may be caused by a couple of things; a faulty sensor, after installing a new car radio, or a malfunction in the air bag system. One of the most common reasons an airbag light may be blinking is after an accident and the airbags have deployed. You will need to have your airbag module reset. The airbag control module will store all different kinds of codes including crash codes, hard codes, soft codes, latch codes. Usually, dealerships or body shops will just tell you that you have a bad module. Bringing your module into Safety Restore and get the module fixed by professional technicians and save hundreds of dollars with amazing results.
If the airbag light won’t turn off and it wasn’t caused by an accident and was caused by a faulty sensor or just a malfunction in the system itself then there are a couple of ways to do an airbag light reset yourself. After you have fixed the problem you may do the reset by using a computerized handheld airbag light reset tool. There are a couple of steps on how to do a reset. The first step is to put the key into the ignition and turn the switch to the “on” position. The second step is to wait for the airbag light to turn on. The light will stay on for seven seconds and then shut itself off. After it shuts off, turn the switch off right away and wait three seconds. Repeat Steps 1 and 2 two more times. Start the car’s engine. The light should come on for seven seconds, and then shut off and stay off. The airbag light has been reset.
If your airbag light turns on an airbag light reset should be done right away. Driving with the light on; you may risk an accidental deployment of the airbag. Always make sure your airbag light is off and safe for you and your passengers when on the road.
While driving down the road, there are several things you are keeping your eye on including your speed, the road, passing cars, and even your gas tank. However, with all that, it is easy to ignore yet another light or thing to focus on. This includes the airbag light. Now you may be asking “My airbag light is on. So what?!” A lit airbag light should never be ignored as it can be a sign of something wrong with your vehicles Supplemental Restraint System. This may result in the system not working correctly when you need it most, in the event of an accident. For example, the airbags may not be able to deploy correctly during a collision. While seat belts are the first line of defense, the airbags play a major role in protecting you further if the accident is severe enough.
The airbag module is considered to be the brains of your airbag system. It is continuously working, writing data, and communicating with the vehicles engine computer. In the event the vehicle is in an accident, the airbag module determines what needs to occur, such as airbags deploying or the seat belt pretensioner locking. If the airbag module is not working correctly, it is unsafe to drive your vehicle, since you are not protecting. The airbag light may be an indicator to an issue with the airbag module, so check the car system for fault codes.
If you are someone who is asking the question “My airbag light is on. What do I do?”, visit SafetyRestore.com. A typical dealer may tell you that you need to replace your module or may charge you hundreds if not upwards of 1,000 to get you back on the road. However, Safety Restore can help you for a fraction of the cost. They are a professional post accident repair company specializing in your vehicles Supplemental Restraint System. Trusted by thousands, they have a 24 hour turnaround time, getting you back on the road quickly and safely.
Those Pesky Car Problems Are Easier To Fix Than You May Think!
Are you noticing that your airbag light wont turn off, or that your windshield wipers are constantly leaving out an entire strip of window? Perhaps your car seats or under-foot areas keep getting so dirty that there seems to be no way to reverse the damage! All these things are pesky little problems that car owners face on the daily. The problem is that many people notice these things but are too lazy or passive to actually fix them. Often times, when things like this get ignored, they can lead to even greater problems. Below I will describe some easy solutions for these bothersome car troubles.
First, let’s talk about the car seats or under-foot area getting dirty. We all know how a few hours of pouring rain or a few sticky fingers can turn some new car seats or car mats into ugly, worn-out messes! Because some dirt is inevitable, it shouldn’t come as a complete surprise when it happens. However, it’s good to be prepared for when it does, and also to know of ways to remove the mess. A great suggestion is to cover the seats with seat covers and the floors or mats of the car with some plastic floor mats. Both can be efficiently removed and washed before replacing into the vehicle! Talk about an easy and practical solution to this pesky problem!
Another pesky problem I mentioned is the windshields working semi-successfully. When this begins to happen, you should consider getting replacement wipers immediately. However, contrary to what you may think, they aren’t necessarily expensive! Some models are more pricey, but others cost as little as $20 for a pair!
Annoying Things In Your Car That You Should Fix Now Rather Than Later
We all have repairs in our homes that we tend to push off for days, if not weeks. Heck, some people wait months and even years to do something as simple as repaint a fence! For some reason or other, people usually overestimate the time and money that is required to complete such simple projects—and as a result, keep pushing them off into the future. This behavior continues with car problems too—even pesky little ones, like an airbag light turning on or the windshield wipers working improperly. Below I will go into detail about these pesky car troubles that people tend to ignore, as well as easy ways to overcome them.
First, like I mentioned, there is the windshield wiper problem. This semi-wiping, semi-leaving out an entire patch of window-business is more common than you think! It’s funny, because this is one of the simplest, and cheapest, things to fix in a car. All that needs to be done is a trip to an Auto Zone, where new windshield wipers can be purchased for as little as $20!
Another issue that car owners see in their vehicles quite often is little scratches showing up on the exterior paint. After years of driving, these scratches may be the result of anything from branches scraping by or from bad weather like snow or sleet. Whatever the cause may be, the solution doesn’t have to be a brand new paint job! Obviously that would cost a lot of money. Instead, specific scratch eraser pens or turtle wax rubbing compounds exist and can be purchased for a fraction of the price of a new paint job. Best of all—they often yield the same results!
Car Repairs You May Need To Get After Being Involved In A Crash
If you have recently been involved in a crash, there are certain things you may need to replace or fix in your vehicle. Some problems may be bigger than you think, and others may end up costing you a lot less and being a lot easier than you imagined they would be! Below I will describe a few of them.
One thing that may very likely need to be replaced is your car’s front bumper. If the accident was your fault, and you hit another vehicle, it is likely that you hit it with the front of your car. This kind of impact likely shattered your bumper, or at least left some dents in it. Regardless, the cost of getting a new bumper may be anywhere between $300 and $700. If your lights, cameras, sensors, or other components were also damaged, this may increase the cost.
Another thing that you may need to fix after being involved in an accident is the windows. If the accident was severe enough, one or more of your windows probably had shattered. Unless you want to drive around with a taped-up window frame, you should look into buying replacement glass immediately. Most people can expect to pay anywhere between $200 and $450 for a new window in their vehicle.
After a crash, you may notice that your car has a lot more scratches on it too. For this you can go two different routes. You can choose to get a brand new paint job on your vehicle, or you can go with the more affordable option and purchase scratch-removal pens or liquid. Either option can yield positive results, it just depends on what you prefer.
It’s kind of funny how some car repairs such as battery changes, oil changes, and tire changes are talked about often—and most people know how to do them—and then there are things like the airbags that drivers don’t pay much attention to. This doesn’t go to say that the former repairs are important, it’s just that dealing with the airbags may be equally, if not more, important. The airbags serve as secondary restraint systems and play a very essential role in the safety of a driver and his passengers. Therefore, it is important to learn about the different parts of the airbag system and why an airbag light might come on. Let me be the one to tell you.
Basically put, the entire airbag system runs through a unit called the SRS airbag control module. This includes the seat belts, the airbags, and the impact sensors. When the airbag light comes on in a vehicle, it means that something is wrong with the airbag system. As a result, the airbags will not deploy until the problem is reversed. By resetting the SRS airbag control module, or purchasing an entirely new one, drivers will no longer experience the airbag light.
As you can imagine, the purchase of a brand new unit can come with quite a hefty price tag. Therefore, many people opt to have their faulty unit reset. Some choose to conquer the problem on their own by purchasing the software and tools and following instructions online to remove all the stored crash data and hard codes on the unit.
The airbag light is one of those things you should definitely pay attention to. I say this because ignoring it can literally be the difference between your life and death. When the airbag light turns on, this means that the airbag system is not properly functioning. Therefore, if you were to find yourself involved in an accident or sudden stop, your airbags would not deploy—which we all know can result in serious injury or even death.
Make sure to pay attention that your airbag light works properly. If your vehicle—and airbag system—is working properly, the light should remain off. Or, in some vehicles, it may turn on for a few seconds along with all other displays and then immediately dim out. This is normal. If the light persists, however, this is when you should get your airbag system looked at!
You can either send your vehicle in to a trusted automotive shop, or purchase a scanning tool on your own to check for any fault codes or crash data in your vehicle’s SRS airbag control module. This module is a small device that will be able to tell you all you need to know about your faulty airbag system. Once any codes are detected, you should then proceed by getting them removed. This can be accomplished by either replacing the unit entirely with a brand new module, or buying software to reset the unit from home. There are numerous online resources detailing how the unit can be reset. If you don’t completely trust in your own abilities, you also have the option to send the unit in to Safety Restore. This company will completely eradicate all hard codes and crash data and will return a practically new module back to you. You’ll also have a lifetime warranty to go with it.
If you are unsure of what causes the airbag light to come on in a vehicle, let me fill you in.
Basically, the airbag light comes on when any part of the airbag system—which consists of the seat belts, impact sensors, the SRS airbag control module, and the actual airbags—is not functioning properly. The airbag light warns the driver that the airbags will not deploy during a collision or sudden stop until the problem is dealt with. Without airbags deploying, the occupants of that vehicle can face serious injury and possibly even death, as they will not be protected in this way.
To avoid driving hazardously, drivers should immediately do everything in their power to get their airbag system working properly again. Oftentimes, the solution lies in the SRS airbag control module. Drivers have the choice to purchase a brand new SRS airbag control module at the dealer, or have their present one reset. The first option may sound better but it costs much more—and honestly, the second option can garner the same results.
If drivers choose to have their present module reset, they can either do it themselves or bring it to a company to get it done. The DIY option certainly does take some work but is still doable. All that is needed is the right software and tools, detailed instructions from online, and patience. The unit needs to be removed from the vehicle, the hard codes and crash data removed, and then the unit can be reinstalled into the car.
Have you ever looked at the pesky light(s) that turned on your speedometer and actually done something about it? Or are you like most people who just ignores it in hopes of it somehow going away? Believe it or not, ignoring the light, especially if it is your airbag light can be the fine line between your life and death. Below, let me explain to you what it means when the airbag light comes on, and why you shouldn’t just ignore it.
To start with, you should probably know what the airbag light really means in order to know why it is so dangerous to disregard it. The airbag light turning on basically says that there is something wrong with your airbag system—which can include anything from the seat belts, impact sensors, airbags, or SRS airbag control module. When the airbag light pops up, it means the airbag system cannot operate properly and therefore the airbags will not deploy in the event of a collision or sudden stop. Obviously, this is a serious problem as the airbags are important safety features in a vehicle.
If you want your airbag light to turn off, your best bet would be to purchase a scanning tool that can tell you what hard codes or crash data are found in your vehicle’s SRS airbag control module. You can bring your vehicle into an automotive shop for them to do this step for you just as well. Once the fault codes have been detected you can go ahead with reversing the problem. You can do this by buying a brand new unit at the dealer or resetting your present module. The latter option is much more cost-effective and will give you pretty much the same results. You can follow instructions online to reset the airbag module at home or you can send it in to the company Safety Restore so that they could do it for you.