The SRS airbag module is a very important safety component of a vehicle. It is located in all vehicles, usually underneath the driver’s seat or front passenger’s seat. Sometimes, it can be found in the kick panel, center console, behind the steering wheel, or underneath the radio. The reason it is so important is because it is part of the airbag system—and as we know, the airbags are important safety features in a vehicle. As a matter of fact, the airbags serve as the secondary, or supplementary restraint systems, right alongside the seat belts—which we all grew up learning the importance of. The seat belts and airbags work hand in hand to protect the driver and any occupants in a vehicle. The seat belts work by restraining the occupants so that if an accident were to occur they would not propel out of a vehicle, bump against internal components, or hit each other. The airbags help by protecting the occupants from severe injury. They do so by masking their impact against the steering wheel or the seat in front of them when a crash occurs. The thing is when a car is involved in a crash, the seat belts can lock up or get blown and the SRS airbag unit will likely develop crash data and hard codes. Both become an issue to the safety and function of the vehicle. If the seat belts lock up or are blown, they will not be able to be used. The SRS airbag control module storing crash data and hard codes is a whole other issue. When this data is stored, nothing but an airbag module reset will be able to get rid of it. The problem is until the airbag module reset is performed, the airbags in the vehicle will not work at all. That is why it is essential to purchase the best airbag module reset tools and get the unit reset immediately. Or, you can go to the dealer and purchase a brand new module. Of course, if you aren’t very tech or car savvy, and you don’t have the extra cash lying around required for a new module at the dealer, you may want to look into another option. That option would be Safety Restore. Safety Restore is a company that specializes in the resetting of SRS airbag modules, as well as repairing seat belts. You can even send your seat belts and SRS airbag control module all in one order and have the company repair the units for you! Safety Restore is affordable, trustworthy, and definitely the practical choice for drivers recently involved in a crash.
If you have recently been involved in a car accident, there are a number of things you probably have on your plate at the moment—two of them being the need to reset your SRS airbag control module and repair your seat belts.
The seat belts are something you should get repaired immediately, as they are the number one safety component in your vehicle. If you see that the gas charge on any of your seat belts went off during the accident, this is an indication that the seat belt buckle pre-tensioner will need to be repaired. You will also be able to tell if your seat belt pre-tensioner is bad by visually inspecting it and noticing a compressed, or squished in, look. If you are not too familiar with cars and don’t want to misjudge the condition of your seat belts, your best bet would be to purchase an OBD airbag scanner tool. You will be able to use this to properly scan your vehicle’s system and see if any codes indicating buckle repair is needed show up. To find a good quality OBD airbag scanner, you can turn to obdadvisor.com. There, you can read through and select the OBD scanning tool you prefer. The website is easy to navigate and offers pros and cons of different OBD airbag scanners. You’ll find that the editor’s choice OBD airbag scanner is the Autel MaxiLink ML619, the most affordable is the BlueDriver, and one that is also great is the INNOVA 3100J.
After scanning your vehicle’s system with the OBD scanner you purchased and seeing codes pop up, you should immediately tackle the problem. You have a few options. For one, you can turn to a dealership and purchase brand new seat belts. Or, you can go with a much more affordable option that still yields the same results. You can send your seat belts to the company Safety Restore. Safety Restore employs skilled engineers who will be able to disassemble your seat belts and repair the buckles so that they could work properly again. Once the repair process is complete, the issues reported by the scanner will no longer be evident and your seat belts will work as new again.
If your airbags went off in the crash, the SRS airbag control module should also be repaired alongside the seat belts. Safety Restore specializes in the repair of airbag control modules as well. Similar to the seat belt service the company offers, you’d simply need to remove your module from your vehicle and ship it out to the company. The skilled technicians will clear the codes so that the module and airbags in your vehicle can function properly again!
Different Internal Damages That Your Car May Have After An Accident
After an automotive accident, there are several external damages that can likely be found on the vehicles involved. Usually, when a car collides with another vehicle or object, the first thing that happens is the body of the car gets scratched, dented, or broken off. The glass of one or more of the windows may shatter simultaneously. Additionally, the tires may pop and the headlights may break. Although this kind of damage can be expected after a crash, so can internal damage. If your own car has recently been involved in a crash, you may want to check if you have any of the following internal issue.
For one, some cars face issues with their radiator after a car accident. If a collision occurs on the front end of the vehicle, there will inevitably be damage to the radiator. Outside of the frame, most modern cars are not built to be super strong. Therefore, the force of an accident usually reaches to the radiator and damages, if not completely destroys, it.
The other compartments under the hood are also likely to get damaged or destroyed in an accident, particularly if the hood happened to crumble in the crash. If you see that the hood has been crumbled or has completely pushed back into the passenger compartment of your vehicle, make sure to inspect all the different pipes and gadgets carefully. Pay close attention to see if there are any broken off bits, any leaking reservoirs, or any parts crushing others.
The airbags are another internal component that often go off when an accident occurs. When this happens, the SRS airbag control module located inside the vehicle stores crash data and hard codes. In order for the airbags to work properly again, the SRS airbag module needs to be repaired. Therefore, if you own a Toyota Corolla and the airbags have been blown, you should look into getting Toyota Corolla airbag module repair immediately. Now you may think that Toyota Corolla airbag module repair can only be done at a Toyota dealer, but this cannot be further from the truth. The company Safety Restore specializes in SRS air bag module repair and will be able to perform quality and affordable Toyota Corolla airbag module repair for you. Simply visit safetyrestore.com.
If you have educated yourself on the different safety components in your vehicle, you likely learned about the SRS airbag module. If you have not, I cannot stress enough to you the importance of it for the overall functionality and safety of your vehicle. Even though it is a small component in your vehicle, it plays a big role. Let me tell you just how it does that.
To start off, the SRS airbag module is a computerized system in your car. What it basically does is control the entire airbag system in your vehicle. Everything from the airbags themselves, the impact sensors, and even the seat belt pre-tensioners—relies on the module to properly function. During a sudden stop or collision, where the airbags deploy, the airbag module stores a ton of information in the form of crash data and hard codes. This information includes seat belt use, the vehicle and engine speed, seat belt pre-tensioner deployments, impact speed change, throttle position, airbag deployments, and brake light switch position. Interestingly enough, this type of information is almost always admissible in court and usually trumps other physical evidence or verbal explanations.
When the airbag module is not up to par—or has all this data stored—the airbags cannot deploy in an accident. This, as a result, can potentially lead to serious injury or even death. That is why you should have the unit replaced immediately. You do not want to be endangering your own life or that of your passengers.
You basically have two options when it comes to fixing a faulty airbag module. The first, and pricier, option is to purchase a brand new module at the dealer. Or, you can send in your present unit to the company Safety Restore so that they can restore it to factory settings.
If you haven’t yet heard about the airbag control module in your vehicle, there is a lot for you to learn. This unit—though small compared to other parts of your vehicle—serves a crucial role in preserving your safety and operating your vehicle.
Basically put, the entire airbag system runs through and operates by the airbag control module. Without the module, the airbags in your vehicle would not work, or would deploy, during a sudden stop or collision. As a result, driving without a properly operating airbag control module can serve as a giant safety hazard. During a collision, airbags are what prevent occupants of a vehicle from colliding into other objects or people inside the vehicle or from completely projecting through the windshield. Without an airbag control module present, both drivers and passengers alike would not have such protection.
What is also important about the airbag control module is that it stores crash data and hard codes. This information is what courts sometimes retrieve and use to decipher the events leading up to and during a crash. The unit can store vehicle and engine speed, throttle position, brake light switch position, seat belt use, impact speed change, and airbag and pre-tensioner deployments. This is quite a bit of useful information stored in one simple module.
Heavy-duty vehicles such as trucks and buses are equipped with something similar to an airbag control module—an engine control module, or ECU. ECUs actually record a lot more information than airbag control modules do—they can store information up to 60 seconds before a crash!
After airbags deploy, nothing but a reset or getting a brand new unit will allow you to get rid of the codes. The first option is much more practical and affordable. A company that can do an airbag control module reset for you is Safety Restore.
When resetting their SRS airbag module, many people run into the issue of their airbag module not communicating properly. This can happen for a number of reasons. Read below to find out a few of those reasons.
One reason your SRS airbag module may not be communicating properly is because it is improperly grounded. This simply means that it needs to be bolted down completely in the reinstallation process. Believe it or not, this issue is pretty common.
Another reason may be because of the communication pins at the plug. To make sure this isn’t the reason you are having communication issues, make sure to inspect the communication pins where the harness connect into the front of the airbag module. Look out for any damage or corrosion present. Sometimes, the pins can push back, bend, or even break off.
A third cause of your airbag module not communicating may be because of problems with your scanner, and not the actual module itself. To scan your airbag module, make sure that the scanner you use is able to properly read the airbag diagnostic codes. The scanner should access your airbag system and support your vehicle make and model. A lot of scanners are just set to read the basic engine codes so you want to make sure yours is set to read your codes. Also, if you have a newer car you want to make sure you are not using an outdated scanning tool.
The wiring or harness can also be the reason for the issues you are having. Make sure to check that the harness or wiring surrounding the SRS airbag module isn’t cut or otherwise damaged anywhere.
If you determine that all the above issues aren’t the reason for your communication problems, you may want to send your SRS module to a professional company like Safety Restore.
You probably already know by now the functionality of the SRS airbag module in your vehicle and its overall importance in preserving your safety on the road. You know that the SRS airbag module is responsible for tying in the entire airbag system including the airbags themselves, the impact sensors, and even the seat belt pre-tensioners. Without the airbag module working properly, none of these parts can function individually the way they are intended to. This means that if your car is involved in a crash, the airbags will not deploy which can result in serious injury or even death. For this reason, you know how crucial it is to get a brand new module—or your previous one reset—immediately after it becomes faulty or has stored crash data. If you go with the latter option, getting the reset is one thing. Testing to see if the reset was a success is another. Below are the steps you should take to test your airbag module and see that all previous crash data and hard codes have been erased. The process is quite simple.
To begin, you need to reinstall the airbag module into your vehicle. Make sure all the wiring that was disconnected in the initial disassembly process is reconnected. Then you can reconnect your car’s battery. After that, just turn on your car and take a look at the airbag light found on the instrument panel of your console. If the airbag module reset was a success, the airbag light should dim out within approximately 7 seconds. If the light fails to turn off, you may need to bring the unit to a professional company or contact your local dealership. The company Safety Restore specializes in SRS airbag module resetting, and can definitely be trusted if you see that you were unsuccessful in completing the job yourself.
An airbag control module is the mechanism that controls the airbag system. There are several airbags in a vehicle, some located in the front, on the sides, or on knee-level to passengers. However, there is only one SRS airbag module unit in a vehicle. The location of the airbag module differs from vehicle to vehicle depending on the make and model of it. In some vehicles, it is located in the center console, kick panel, under the radio, or behind the steering wheel. Generally, though, it can be found underneath the driver’s seat or front passenger’s seat. Heavy-duty vehicles such as buses and trucks have engine control modules instead of airbag control modules. These units are often located beneath the instrument panel glove box on the front-passenger side of the vehicle.
The importance of an airbag module cannot be stressed enough. It makes the workings of the entire airbag system possible. When a sudden stop or collision occurs, the airbag module receives information from the impact sensor that then passes on a signal to deploy the airbags. Without a properly functioning airbag module in a vehicle, the airbags wouldn’t even deploy. After airbag deployment, the airbag sensor is locked until it is replaced or completely reprogrammed.
Following a crash, the information stored in the airbag module in the form of hard codes and crash data can prove quite useful—and is usually admissible in court too. Everything from seat belt use, engine and vehicle speed, brake light switch position, throttle position, impact speed change, airbag deployments and seat belt pre-tensioner deployments are stored in this small unit. Those who analyze car accidents often look at the airbag module information and find it more beneficial than other physical evidence or verbal explanation.
If you yourself have been involved in an accident, refrain from buying a brand new module. Instead, have your present unit restored to factory settings by the company Safety Restore.
In life, there are many chances we can take. However, that doesn’t mean that all of them are wise decisions or ones we should be taking. Driving a car without an airbag module is a perfect example of this. Although a car certainly can run without an airbag module installed, it definitely does not benefit anyone in the vehicle. If your car has a faulty airbag module or is ridden with hard codes and crash data, it should be reset immediately!
Without a properly functioning airbag module, passengers of a vehicle are basically saying no to airbags. That is because without an airbag module, the entire airbag system does not function. As you can imagine, this can pose as a huge problem. Airbags are what prevent many serious injuries and even death from occurring, as they serve as secondary restraints alongside seat belts. The change of momentum and force that an occupant of a vehicle experiences during a collision is lessened with the presence of airbags.
An owner or operator of a vehicle should check if their airbag module is working at all times. If it is not, a new one should be purchased or the old one reset. If needed, alternative transportation should be arranged, so as not to jeopardize safety in any way. This is a serious matter and shouldn’t be taken lightly.
Although some people choose to purchase a brand new airbag module after theirs becomes faulty following a crash, there are other alternatives. Special tools and software could be purchased to reset SRS airbag modules to factory settings at home. The wiser—and more affordable—alternative to that would be to send the faulty airbag module system to a company that specializes in fixing SRS airbag modules. An example of such a company is Safety Restore.
You may have heard people mention driver airbag modules here and there, but not quite understand what it is and what it does yourself. Let me fill you in.
Although the SRS airbag module is a small unit in the vehicle—it serves a crucial role in the overall operation and safety of a vehicle.
Explained simply, an SRS airbag module is a computerized mechanism in a vehicle that controls the entire airbag system. When airbags deploy during a sudden stop or collision, the airbag module system stores crash data and hard codes that can only be removed by a complete reset. Some of the crash data that the unit records includes the vehicle speed, brake light switch position, the engine speed, and the throttle position—obtained from up to eight seconds before the impact! The unit may also store the impact speed change, airbag and seat belt pre-tensioner deployment information, and records of seat belt use. This information is stored in a memory that can be downloaded at a later time. An accident reconstructionist can use this information to piece together the events of a crash, which can then be used for insurance and legal purposes. Generally, the records taken from the SRS airbag module are admissible in court.
Some other names the SRS airbag module goes by are airbag control module, diagnostic unit, airbag sensor, and computer module.
The SRS unit can be mounted in different locations, depending on the make and model of vehicle, but is generally located underneath the driver’s seat.
After an accident, drivers have two choices—to buy a brand new airbag module or have the system reset. The latter option is much more affordable and just as effective. Resetting SRS airbag modules and restoring them to factory settings is one of the specialties of the company Safety Restore.