OBD Airbag Scanner

Get your OBD Airbag Scanner today!

If you have recently been involved in a car accident, there are a number of things you probably have on your plate at the moment—two of them being the need to reset your SRS airbag control module and repair your seat belts.

The seat belts are something you should get repaired immediately, as they are the number one safety component in your vehicle. If you see that the gas charge on any of your seat belts went off during the accident, this is an indication that the seat belt buckle pre-tensioner will need to be repaired. You will also be able to tell if your seat belt pre-tensioner is bad by visually inspecting it and noticing a compressed, or squished in, look. If you are not too familiar with cars and don’t want to misjudge the condition of your seat belts, your best bet would be to purchase an OBD airbag scanner tool. You will be able to use this to properly scan your vehicle’s system and see if any codes indicating buckle repair is needed show up. To find a good quality OBD airbag scanner, you can turn to obdadvisor.com. There, you can read through and select the OBD scanning tool you prefer. The website is easy to navigate and offers pros and cons of different OBD airbag scanners. You’ll find that the editor’s choice OBD airbag scanner is the Autel MaxiLink ML619, the most affordable is the BlueDriver, and one that is also great is the INNOVA 3100J.

After scanning your vehicle’s system with the OBD scanner you purchased and seeing codes pop up, you should immediately tackle the problem. You have a few options. For one, you can turn to a dealership and purchase brand new seat belts. Or, you can go with a much more affordable option that still yields the same results. You can send your seat belts to the company Safety Restore. Safety Restore employs skilled engineers who will be able to disassemble your seat belts and repair the buckles so that they could work properly again. Once the repair process is complete, the issues reported by the scanner will no longer be evident and your seat belts will work as new again.

If your airbags went off in the crash, the SRS airbag control module should also be repaired alongside the seat belts. Safety Restore specializes in the repair of airbag control modules as well. Similar to the seat belt service the company offers, you’d simply need to remove your module from your vehicle and ship it out to the company. The skilled technicians will clear the codes so that the module and airbags in your vehicle can function properly again!