Do I Need An Airbag Module Reset After an Accident?

Airbag-Module-Reset
Airbag Module Reset after an accident

Accidents happen we all know that, whether it is your fault or not, sometimes we just can’t avoid them. With more than 143 million Americans driving daily, there’s no doubt that car accidents are bound to happen. The average number of car accidents in the U.S. every year is 6 million and more than 90 people die in car accidents every day. So making sure all your safety components in your vehicle are maintained and updated. One of the main components that need to be maintained is the airbag system especially if you have been in an accident.

If you are someone or know someone that has been in an accident and uses the same vehicle getting an airbag module reset is very important. SRS Airbag module computers, found in cars, control the entire airbag system. Everything from the impact sensors, airbags, and seat belts go through it. Even in the event of a minor accident, the airbag module may store crash data and light up your check engine light. In other words, if an accident happens, the SRS airbag module writes codes in its memory that contain crash information. Once it is written, this SRS controller becomes “locked” until it is replaced or reprogrammed. This is because the car will no longer be safe to operate. Meaning the airbag will not work properly and do its job when it is needed the most. At this point, the airbag module goes into something called a “black box” state, which it awaits an accident investigation in case it is needed. Other then that when the car is written off the insurance or the accident was a minor one, the vehicle can return on the road. In which case the SRS airbag comfort modules need to be reset.

If you have been in an accident and are looking for a place to get a SRS airbag module reset then contact Safety Restore. Safety Restore is a company that specializes in airbag module resets, and offer affordable prices as well as a 24-hour turnaround. Your SRS module will be reset, and your airbag light will go away. They will reprogram the SRS module to factory conditions, making the airbag computer as good as new. All codes from the accident will be erased and cleared. Any SRS faults that are present will come back up until the problem is addressed.

Safety Restore—The Company To Turn To When You Need An Airbag Module Reset

airbag-module-reset
Who do you turn to for airbag module reset?

Ever wonder why people make such a big deal about the seat belts and the airbags in a vehicle? Sure, you may know that both serve as safety precautions and protection if an accident were to occur. However, you may not be familiar with just how important of a role they play in your protection on the road.

You see, the seat belts and the airbags perform very opposite, yet important, tasks. The seat belts secure the occupants into their seats in order to have maximum protection against the airbags and from getting propelled out of the vehicle. The airbags, on the other hand, cushion an occupant from getting severely injured when an accident suddenly occurs. Even though they serve different functions, these two safety components are linked very closely together. As a matter of fact, a small unit called the SRS airbag control module links the two. The role of the airbag module is to monitor the vehicle and detect any information at the time of a crash. It then inputs all of this information into its system in the form of crash data and hard codes. Nothing but airbag module replacement or an airbag module reset can remedy this problem. It is also important to note that with these hard codes and crash data present, the airbags are not able to function in the vehicle whatsoever. Of course, you want to drive with both the airbags and the seat belts functioning properly at all times. Therefore, you should look into getting an airbag module reset immediately if this were to happen to you.

A trusted and true module repair shop that performs quality airbag module reset services is Safety Restore. Safety Restore has been in business for years now and has perfected this service down to a T. When the company receives faulty airbag modules from customers, it takes them apart piece by piece and removes each individual hard code. Once the crash data and hard codes are wiped out entirely, they then piece the unit back together. The customer can then replace the module back into their vehicle and watch it work like new again. Ultimately, it yields the same result as purchasing a brand new airbag module, yet the price is much more affordable.

If you have issues with your own airbag module, head over to safetyrestore.com today and order a reset service. It will save you a ton of energy, time, and money from going out and purchasing airbag module reset tools to do the service yourself or purchasing a brand new unit at the dealer.