Sometimes, our seat belt can act up, locking, ripping, or just not working. You may need to get the seat belt repair or even replaced if there’s too much damage. If you enjoy or take pride in doing things on your own, you may want to tackle the seat belt repair yourself. Here is a quick guide on how to fix a seat belt retractor or even a jammed seat belt.
There are two common situations to look for that may be the reason for your problems. The first is when dirt and grime is on the seat belt webbing. This can cause the belt to retract slower than it should. The second is when the seat belt retractor is locked.
If the issue is with the dirt and grime, you would need to clean the webbing thoroughly. Start by pulling the webbing out completely and clamp the end of the webbing so it does not retract back in. Next, using a cleaner, clean off the dirt or grime. If the dirt is being stubborn, try to soak the webbing to loosen it before scrubbing some more. Dry off the webbing completely before retracting it back into the mechanism.
If the seat belt is locked, start by pulling the webbing out of the seat belt completely and then give it a yank. If this does not work for you, take out the retractor out of the vehicle. Then, using a screwdriver you can manually spin the spool. This slowly retracts the seat belt webbing back into the mechanism. If all else fails or if you feel like you don’t want to take on this task yourself, you will need a professional seat belt repair service to help you get seat belt retractor repair, like Safety Restore.
Safety Restore is a post accident restoration company offering several services. They can fix a locked seat belt, along with getting your module reset, custom seat belt webbing, seat belt retractor repair, and more. They use 100% OEM parts and offer a lifetime guarantee on all their services. Thousands of customers rely on Safety Restore to get them back on the road quickly and safely. Visit SafetyRestore.com.
Seat belts, like all other parts of a vehicle, can become faulty or break over time. However, unlike other components of a vehicle, there are numerous reasons as to why a seat belt may stop working. Below I will name a few.
For one, a seat belt may become faulty because of the pretensioner. The pretensioner, otherwise known as the buckle, is the female portion of the seat belt. It is where the seat belt retractor fits into. Whereas most seat belt buckles do not come with a gas charge, some do and it serves as a secondary restraint. If the gas charge goes off—for instance in a car accident—the seat belt pretensioner is no longer able work properly. It would have a compressed appearance and would not be able to project any gas charges until proper maintenance were to be performed.
Of course, if a faulty seat belt has a perfectly normal pretensioner, the problem may lie in the seat belt retractor. The retractor is the male part of the seat belt that plugs into the pretensioner. It is responsible for locking up in a sudden stop. Its other responsibility is connecting to the airbag system and employing a gas charge that goes off in an accident. When a seat belt is deployed in an accident, the seat belt retractor becomes locked and needs to be replaced or repaired.
Besides the retractor and seat belt webbing, seat belt issues may also be due to bad seat belt webbing. Over time, the material webbing on a seat belt mechanism can become cut, torn, frayed, or even chewed through by pets. As you can imagine, this can cause poor seat belt retraction and bad protection overall. Without proper webbing, an occupant cannot be perfectly shielded from the force of an impact.
Fortunately, there is a company that can deal with any of these seat belt issues! Safety Restore is a seat belt repair shop that knows how to fix seat belt tensioners, retractors, and webbing. The great thing about this company is that it has affordable prices, a lifetime warranty on all services, a fast turnaround time, and a quality and satisfaction guarantee.